[navibulgaria]

what's the problem with sending you 100 pictures in a private message

[congo11]

Your mmi or the cleint
Someone is in trouble.

I belive you know where to find me if you want "your" unit to be saved.

Good day

[navibulgaria]

as I thought, there are no MiB Engineers here, there are only people who write and after 5 hours or 1 day they write again, they have no desire to help and hide behind their profiles

[vierchatura]

I told you need desolder and rewrite RCC_FS0 BGA64 chip and eMMC phisically. Give it to professionals better. You have no such skills anyway

[navibulgaria]

Hello
I Still Can't Find A MIB Engineer To Help Me Repair The Broken Mib So If I Don't Find Help By Tomorrow I'm Forced To Dump The MIB In The Container
If Someone Wants To Give Him A Broken MIB, Leave Delivery Details Here

[vierchatura]

Can send to me. I told you what needs to be done. I can do it but need physical access to unit. It is almost impossible to fix it by UART because to short time unit till restart. even in RCC DeveloperMode
there is no MMX chip on this unit because it is in eMMC mounted as MMX. Thats why MHI2 differs from MHI2Q

[navibulgaria]

restarts every 5 min the time is quite enough
I have heard that experts do it in 1 minute
this mib is child's play for professor and mib expert

[DukeFawks]

Can send to me. I told you what needs to be done. I can do it but need physical access to unit. It is almost impossible to fix it by UART because to short time unit till restart. even in RCC DeveloperMode
there is no MMX chip on this unit because it is in eMMC mounted as MMX. Thats why MHI2 differs from MHI2Q

Just manually set the "do-not-reset" flag in /tmp and unit will not reboot. RCC can only enter emergency if MMX is also running in emergency else RCC boot hangs.
Writing the correct images from SD update to eMMC is even easier than on MHI2..... no ANDROID! headers to deal with. If MMX is stuck in emergency just need to fix the GPT entry for mifs1, to make it boot in normal mode again.
If the unit is then stuck in SWDL mode after all this is fixed then need to correct 0x31 in EEPROM which sets MMX boot mode. C7h in 0x31 will make MMX always boot in SWDL mode.......

If only RCC is messed up with bad patch and by that damaged IFS stage2 then there is enough time before watchdog reset to flash good stage2. Just need to manually start flash driver and have flashit/flashunlock on SD card.

Anyway, all-in-all this is at most a 15 minute fix with access to MMX UART.

[navibulgaria]

Sincere Thanks to All MiB Masters for the Help
5 minutes ago I kicked Mib off the Eighth Floor

[viteamo]

. amen