Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Toyota Yaris (Year: 10/2006) - (all keys lost)
|
18-02-2024, 15:03 PM,
Post: #1
|
|||
|
|||
Toyota Yaris (Year: 10/2006) - (all keys lost)
Hi guys,
Can someone please help me add a new key to the Immobox (Viseton 89780-0D010). I bought the Autel IM608 II and claim that I am relatively new to key programming. Unfortunately I only have the Autel IM608 and UPA clone with all the scripts. It's about the Toyota Yaris (built 12/2006). I dismantled the entire car and took out the IMMOBOX, opened it and read the chip 93c56 and saved it. I put the new key in the XP400 and wanted to program it into the Eeprom of the 93c56, but in the Autel menu there are already two keys saved in the 1st and 2nd positions and I can't select anything in the 3rd position to add the new key. Because the 3rd digit is completely gray and cannot be selected. So I chose the 2nd position and Autel asked me: Replace Key on Position 2? I selected "YES", and during the further procedure it shows me that it is the wrong transponder. Now i have a new transponder where i can program it with Autel. The car is far away, so i want to ask if someone have a good programming solution for adding the key in the immobox and start the car. I have the following Items at home: - Autel IM608 II - Zed Full (Ver. 1.2.17) - FVDI 2014 (China clone) - UPA (China clone) Does anyone have experience with this vehicle and is it possible to get the vehicle running? Thanks in advice! (On the new Transponder ID70 i can change the Pages 1-4) Here is the old configuration if helps someone: New Key ID: D32DB63EDD88 Memoryside 1: Password = D3 Memoryside 2: User = 2D Memoryside 3: Code(3bytes)/ID(1byte) = B63EDD-88 Memoryside 30: Config Side = 4600 |
