Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved ✔ Cic update on E series
23-02-2024, 21:21 PM,
Post: #11
RE: Cic update on E series
I also did the complete flash on my late 2009 E93 with ICOM NEXT over MOST an all went okay - no errors - worked perfectly with WinKFP.
[+] 1 user says Thank You to NAVJunk for this post
23-02-2024, 21:37 PM, (This post was last modified: 23-02-2024, 21:49 PM by alsamaraee.)
Post: #12
RE: Cic update on E series
DNK76 dateline='[url=tel:1708718041' Wrote:  1708718041[/url]']
I made a mistake programming the CIC,
I used ICOM A1 with a bridge adapter,
WINKFPT,
I just forgot to change the interface in EDIABAS
to port 6802
63 - went for CAN
62- went for CAN
A0- I also started programming using CAN for 50 minutes, only 2% progress, I stopped, changed to port 6802 and reprogrammed again, I didn't even have to use expert mode,
when you program again and it stops at the same moment of programming, check the disk, if it is missing or damaged, it always stops programming at the same moment,

Thank you for your support 
Do you mean the hdd of the cic?

I checked the cic later with ista and it is responding.
I could hear it restarting when I restarted it in ista.

   

Can you please verify the sequence of flash?

BimmerSLO dateline='[url=tel:1708720736' Wrote:  1708720736[/url]']
you can flash 63, 62 and A0 with MOST. Did many units like this with ICOM NEXT with ICOM NEXT B adapter. Dr GINI settings REMOTE/MOST

Thank you for your reply.

What is Dr. GINI? 

Can you please verify the sequence of flash?
23-02-2024, 23:54 PM,
Post: #13
RE: Cic update on E series
CIC programming sequence
this :
63
62
A0
without disabling WINKFPT all,
port 6802 MOST,
and will you choose the interface?
Interface =REMOTE:MOST_ASYNC

Interface =REMOTE:MOST_ASYNC_ab625
or only in EDIABAS.ini
Interface =REMOTE
[TCP]
RemoteHost = xxx.xxx.xxx.xxx (IP ICOM )
with port 6802
it doesn't matter that much
I programmed CIC a lot,
almost always with a positive result,
only in the absence of the CIC HDD I could not finish programming, it always stops at the same moment.

If my post helped you hit the thanks and reputation button!under
[+] 1 user says Thank You to DNK76 for this post
27-02-2024, 11:48 AM,
Post: #14
RE: Cic update on E series
(23-02-2024, 23:54 PM)DNK76 Wrote:  CIC programming sequence
this :
63
62
A0
without disabling WINKFPT all,
  port 6802 MOST,
and will you choose the interface?
Interface =REMOTE:MOST_ASYNC

Interface  =REMOTE:MOST_ASYNC_ab625
or only in EDIABAS.ini
Interface =REMOTE
[TCP]
RemoteHost            =  xxx.xxx.xxx.xxx  (IP ICOM )
with port 6802
it doesn't matter that much
I programmed CIC a lot,
almost always with a positive result,
only in the absence of the CIC HDD I could not finish programming, it always stops at the same moment.

Thank you for clarifying the process. I will pick my most adapter today from the dealership and do the update later today.

Will post the results.
27-02-2024, 21:44 PM,
Post: #15
RE: Cic update on E series
Update....

I used the icom next B and reflashed 63, 62 and A0. Everything went well. The cic back in life again.

What you prefer to retrofit fsc?
28-02-2024, 00:09 AM,
Post: #16
RE: Cic update on E series
patch it and write your own certs.
28-02-2024, 11:38 AM,
Post: #17
RE: Cic update on E series
(28-02-2024, 00:09 AM)zero9 Wrote:  patch it and write your own certs.

Yes, did using FsTool2 and everything working fine.


Possibly Related Threads…
Thread Author Replies Views Last Post
  BMW F650gs dme/ecu update Liteace 10 85 5 hours ago
Last Post: HaakonA
  Making F-series combox work in e-series Ryn079 1 135 6 hours ago
Last Post: Marx
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,480 27-03-2024, 10:39 AM
Last Post: MINIGP1610
  need update & mod VIN from FRM ? ka_rai 7 186 25-03-2024, 01:06 AM
Last Post: armenh7
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 3,905 24-03-2024, 11:29 AM
Last Post: Twointje
  mileage g series virtual bosch id7 tigre 2 216 22-03-2024, 13:00 PM
Last Post: tigre
XZBMW G Series KEY in F34 Rajco 5 362 20-03-2024, 18:56 PM
Last Post: Rajco
XZBMW Update ISTA 4.39.20 SQLiteDBs Italian Language diman64 8 748 09-03-2024, 20:18 PM
Last Post: diman64
XZBMW Update VIN in VCM through esys TIGHTFIN 10 1,156 05-03-2024, 11:26 AM
Last Post: oros
XZBMW Programming_ Changes with xx-xx I level update that are perceptible to the customer shawnsheridan 10 1,926 22-02-2024, 12:17 PM
Last Post: bmchicago

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content