[stjansdal]

Hi


Need some help

EDC16U31 clone.  cloned ext eeprom and ext flash but car still immo issue. Car gooes off after starting.
Car VW T5 tdi 96KW
Any help wil be appreciated.

[StefanDST]

For clone edc 16 i need original eeprom file form old and new ecu only eeprom files not flash files until then i have uploaded a immo off eeprom file

[stjansdal]

I don t have original eeprom from donor. I did already clone eeprom without saving donor eeprom

[StefanDST]

How you have done that clone because some data are not right in original eeprom

Vin: WV2ZZZ7HZ8H013239
Immo number: VWZ7Z0G5575219
CS: 848B64CC507102
MAC: 00000D1C
Pin:183

Pin is to short only 3 characters

My advice is copy eeprom from pld ecu and just write it in new ecu on edc 16 will work

[stjansdal]

I did read old ecu eeprom and did write it on donor ecu.
but car start and goes off.
do you mean eeprom i posted is not good? I did read with flex on bench

[StefanDST]

yes the one you provided here on forum something is not ok pin has only 3 characters instead of 5
Try to read eeprom once again and post it here if on the new reading will be same then only thing is find complete pin from cluster or immo off also Vmax is set to 189km/h so car is limited to 189KM/h

[rece1p23]

yes the one you provided here on forum something is not ok pin has only 3 characters instead of 5

Hello
Is it true that the pin can be found in this vehicle by reading the display clock?

[stjansdal]

yes the one you provided here on forum something is not ok pin has only 3 characters instead of 5

this is the full backup

[StefanDST]

Same proble in this file pin code is to short if pin code is not same in all immo parts car will not start

[al70]

are the ecu's matching numbers ?