[grizzle]

Hi,

I Have NBT Evo ID4 HW 2.3.

Do the Normal NBT Display Work with it?I Tried but i have black screen.
Is there a way for work normal NBT Display with NBT Evo like Voltage converter(LM2596) or anything else?

[Stratofortress]

The CID for NBT is using APIX1 output while LCI CID screens for NBT Evo units use APIX2 output, hence I'm guessing there is an issue with voltage output.

[grizzle]

The CID for NBT is using APIX1 output while LCI CID screens for NBT Evo units use APIX2 output, hence I'm guessing there is an issue with voltage output.

Yes.I Read something that "using LM2596 Voltage Converter fix this" but i am not sure.

[zero9]

Yes, you have to adjust voltage which will go to CID at 8.4VDC, as Evo unit have higher output voltage which will not work for NBT1 CID.

[user_530d]

You need voltage converter to 8,2V for the APIX1 NBT screen.
Only work on APIX1 EVO to APIX1 NBT CID. APIX2 to APIX1 NBT CID not possible, also not with converter.

[zero9]

He have hw which supports apix1.
Also coding, not forget.

Code:

CID_APIX_MODE - apix1
CID_COLOR_DEPTH - 18
CID_COM_MODE - spi
CID_RESOLUTION - 1280 x 480

[user_530d]

He have hw which supports apix1.
Also coding, not forget.

Code:

CID_APIX_MODE - apix1
CID_COLOR_DEPTH - 18
CID_COM_MODE - spi
CID_RESOLUTION - 1280 x 480

APIX1 protocol yes, but old NBT CID only with voltage converter.

[zero9]

Didnt i mention that already before?

[Stratofortress]

This topic has also been previously discussed:

https://cartechnology.co.uk/showthread.php?tid=46791
https://cartechnology.co.uk/showthread.php?tid=20167

[user_530d]

Didnt i mention that already before?

Ohh sorry, posts are overlapped in a small time spann.