Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Golf 6 mib std2
26-02-2024, 11:37 AM,
Post: #1
|
|||
|
|||
Golf 6 mib std2
Hi. I have upgraded to mib std2 multimedia in golf mk6 golf. Tollbox installed with 2x serial programmers and usb. ( not easy way) in gateway no selection 5F module. May enough to update my gateway? Because all working time sync all ok. And from steering wheel buttons working. From gateway removed radio and navi. Now show incorrect coding. When I type 5F manually finding this module. And I ordered from ali usb for CarPlay because with 5Q003572g not working. Question: may someone have update file? I have ori vcp
|
|||
26-02-2024, 14:14 PM,
(This post was last modified: 27-02-2024, 17:52 PM by spooky75.)
Post: #2
|
|||
|
|||
RE: Golf 6 mib std2
You will need new Gateway, HH40-HH53 can be updated only up to version 1642 due to size of internal memory.
To correctly communicate with 5F module, you will need HH55-58 version with SW1663 or higher, depending on components in your car (see bellow). HH55 = Basic + LIN1 + LIN2 HH56 = Basic + LIN1 + LIN2 + CAN-EXT HH57 = Basic HH58 = Basic + LIN1 LIN1 = Generator, BEM LIN2 = Analog Clock, Panorama CAN-EXT = RDKS, AFS, SIDE ASSIST Software versions: 1663, 1673, 1682, 1691, 1708 (latest) Note: You currently have HH42 in your car which is "basic" GW and you can upgrade to any version HH55-58 ----------------------------------------------------------------------
If I helped, please Press "Thanks" and "Reputation" ---------------------------------------------------------------------- |
|||
26-02-2024, 19:50 PM,
(This post was last modified: 26-02-2024, 19:57 PM by kiruxxx.)
Post: #3
|
|||
|
|||
RE: Golf 6 mib std2
|
|||
26-02-2024, 21:06 PM,
(This post was last modified: 26-02-2024, 21:26 PM by vierchatura.)
Post: #4
|
|||
|
|||
RE: Golf 6 mib std2
No you cant because it is MQB Kombi. Also dont remove Radio and Navi from gateway list and better add Telephone to GW List then you will have Navi Phone and radio on Kombi. Other way Kombi will not show these!
You can modify yours Gateway by replacing on it eeprom ST(AT) 95320 to ST(AT) 95640 and program with attached dump and program it with ODISE to latest firmware of gateway. before doing this copy all coging adaptations and GW installation List from original and load all this after update to 7N0907530BC 7N0907530CA and restore coding adaptations and fix GW List |