[evaldazj]

Another issue with this release.
After scanning a car, ISTA shows all modules green while there are errors. The modules with errors are no longer yellow.

Sounds like your ISTA is NOT in ISTA+ mode... As no problem with yellow faulty units here.

Thanks Node, ISTA+ mode was the solution.

How do You change to ISTA+?

[Vojno]

Another issue with this release.
After scanning a car, ISTA shows all modules green while there are errors. The modules with errors are no longer yellow.

Sounds like your ISTA is NOT in ISTA+ mode... As no problem with yellow faulty units here.

Thanks Node, ISTA+ mode was the solution.

How do You change to ISTA+?

including but not limited to:
\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\Rheingold
      "BMW.Rheingold.OperationalMode" ISTA_PLUS

[donke]

Thanks for the patched api32.
This version was not working for me (still slow E-Net and ICOM connection).

At the moment my solution for fast enet is copy the new ISTA Ediabas to the old ediabas folder.
But I still have some speed issues with my original ICOM Next and a new G60 5-series. I will try to figure it out in more detail next week.

[Red_bean_bun]

Thanks for the patched api32.
This version was not working for me (still slow E-Net and ICOM connection).

At the moment my solution for fast enet is copy the new ISTA Ediabas to the old ediabas folder.
But I still have some speed issues with my original ICOM Next and a new G60 5-series. I will try to figure it out in more detail next week.

Did you flash your icom with the .22 version of the firmware ?

[bennymx]

Thanks for the patched api32.
This version was not working for me (still slow E-Net and ICOM connection).

At the moment my solution for fast enet is copy the new ISTA Ediabas to the old ediabas folder.
But I still have some speed issues with my original ICOM Next and a new G60 5-series. I will try to figure it out in more detail next week.

Did you flash your icom with the .22 version of the firmware ?

He must have because 4.46.1x requires it for the ICOM to work. No other choice. I found that if you did not update your ICOM in 4.45.3x and went to 4.46.1x and tried to update it was bugged. ISTA would not update the ICOM. Even with the firmware in shared storage and installed. It needs to be done via the web interface manually. 4.46.1x is full of bugs.

[Node]

I have updated ICOM using ISTA 4.46.1x. Have NO idea where you find those bugs...

[CATAHA]

HERE is a link for you to get you started 

............I will try to figure it out in more detail next week.

[donke]

I had version 4.46.2x but will update today to the newest version. I will also check my icoms firmware. Thank you all for your information.

[NeRkO20]

So just to be updated...parallel using ista+ and NCS/inpa is not possible right?
I mean using them as long as ista+ is connected to car...
I did that very often...
Now (without any of the solutions here) I have to close ista+ to be able to run f.e. ncs.

[glesic1]

I have updated ICOM using ISTA 4.46.1x. Have NO idea where you find those bugs...

Hi ! seems you are only one what is update icom firmware  from ista manager from version 4.46
every Bmw dealer or independat services   have this problem with updating icom from ista manager! 
please if any other here sucessuful update icom please  send feedback thnx !!