[scaper28]

Hi All

I would like to remove the current remap from my car and put it back to stock but then if the issues I am having do not go away put the map back on.

The map was installed by a UK company called remap kings using the superchips file, however they charge £90 to remove it and will not put it back on unless full price is paid.

I was hoping I could purchase something that would let me dump the remap file and put it back on myself if that is possible ?


I do not have the original stock file either so I am not sure if I will still have to pay them to return it back to stock or not ?


Any help and advice would be appreciated .


The car is a VW Golf 2.0 GT TDI MK7 2013

[bogdanwmw]

hello. where file actual?

[DavidForgac]

If you don't want to spend a lot. You want to do it safely, so the best solution is KTAG. You make a backup of the unit. You will have a modified map if you want to upload it to sleep. And you can also upload original software with it. You just need to select the control unit, open it and do it on the table.

[scaper28]

If you don't want to spend a lot. You want to do it safely, so the best solution is KTAG. You make a backup of the unit. You will have a modified map if you want to upload it to sleep. And you can also upload original software with it. You just need to select the control unit, open it and do it on the table.

Thank you for your reply,  How much is the KTAG and where is best to purchase it from , 

when you say open it and do it on the table , do you mean the ECU itself ?


Thanks

---

hello. where file actual?

The original file is with the Remap Kings tuner.

The remap file is on the car at the moment ,


I would like to save the current remapped file and have my car but back to stock, but have the ability to put the remapped file back on my car if I choose too.

[DavidForgac]

If you don't want to do it professionally, just buy a Chinese clone, they can do a lot. they have no problem with EDC17 until 2017. 2018 and above are already starting to have a problem with removing protection. The price of the Chinese clone will be maybe €70-150. We will provide you with the original map if you give us the SW HW number and sw version

[scaper28]

If you don't want to do it professionally, just buy a Chinese clone, they can do a lot. they have no problem with EDC17 until 2017. 2018 and above are already starting to have a problem with removing protection. The price of the Chinese clone will be maybe €70-150. We will provide you with the original map if you give us the SW HW number and sw version

Any KTAG clone master kit on ebay ok for the job ?


This is my VCDS scan of my engine and file 

Address 01: Engine (J623-CRBC)      Labels:. 04L-907-309-V1.clb
  Part No SW: 04L 906 021 DT    HW: 04L 907 309 D
  Component: R4 2,0L EDC  H83 4943 
  Revision: 00H83H22    CVN: 1FDFDBD2
  Coding: 011D0012036505082000
  Shop #: WSC 01357 011 00200
  ASAM Dataset: EV_ECM20TDI01104L906021DT 002003
  ROD: EV_ECM20TDI01104L906021DT_002.rod
  VCID: 7AF1C67BFD906A418D-802E
  VINID: 9E69EAAAA465A949C10800C414249DB460

[zvonexp]

isn't easier and cheaper to get ODIS or VCP and flash with stock frf?

[DavidForgac]

You need the file 04L906021DT_4943 ori.
yes, such a version will be enough for this work.
You can buy KTAG 7,020 or 8,000

---

isn't easier and cheaper to get ODIS or VCP and flash with stock frf?

Tell me how it reads the modified map from the ECU with ODIS/VCP? ODIS/VCP can't do it! His question is not only how to upload the original software, but he also wants to keep the modified software in case he decides to use it again.

[scaper28]

isn't easier and cheaper to get ODIS or VCP and flash with stock frf?

I have VCP but I would like to keep current map to reupload if my issues are not resolved by putting the stock map back on.


Thanks for your advice though.

---

You need the file 04L906021DT_4943 ori.
yes, such a version will be enough for this work.
You can buy KTAG 7,020 or 8,000

---

isn't easier and cheaper to get ODIS or VCP and flash with stock frf?

Tell me how it reads the modified map from the ECU with ODIS/VCP? ODIS/VCP can't do it! His question is not only how to upload the original software, but he also wants to keep the modified software in case he decides to use it again.

Great thank you , now to find the stock 04L 906 021 DT   4943  and to make sure its pre deselgate fix from VW.

[DavidForgac]

isn't easier and cheaper to get ODIS or VCP and flash with stock frf?

I have VCP but I would like to keep current map to reupload if my issues are not resolved by putting the stock map back on.


Thanks for your advice though.

---

You need the file 04L906021DT_4943 ori.
yes, such a version will be enough for this work.
You can buy KTAG 7,020 or 8,000

---

isn't easier and cheaper to get ODIS or VCP and flash with stock frf?

Tell me how it reads the modified map from the ECU with ODIS/VCP? ODIS/VCP can't do it! His question is not only how to upload the original software, but he also wants to keep the modified software in case he decides to use it again.

Great thank you , now to find the stock 04L 906 021 DT   4943  and to make sure its pre deselgate fix from VW.

It is the first software that was made for that car. Older does not exist!
I am uploading the file you need. If I helped you, don't forget to press THX+REP.