Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW MSV70 pad SW during flashing
14-03-2024, 09:09 AM,
Post: #1
|
|||
|
|||
BMW MSV70 pad SW during flashing
Hi, I need help with one BMW 630i 2006 MSV70 3.0i 190kw
The customer wanted to turn off the DTC callers before EK, that he could "Do it" later... Of course it failed - the software crashed while writing the OBD2 KT200II, the original backup didn't work anymore, also writing at 93% gave an error and that's it. So I took the MSV70 route to the table to read the BDM (of course I now know that I should have done it first) to look on the Internet for the original backup of the BDM. I just don't know what exactly to look for, I searched by the numbers on the HW MSV70. After two days of work, he discovered that this ECU had probably been replaced in the past. The number on the ECU is 7567178, and according to the VIN number WBAEH31050B704033, it should be 1214 7577968. So now I'm at the stage of BDM from the Internet - rewriting ISN in CAS 2 - synchronization DME-CAS launch x431, ISTA-D and my car still won't start, the starter spins. One mistake is the 2AA8 variable intake system in the DME (which was also there originally) |