[goontii]

Friends
I searching for pinout display 5h0919605 for golf 8 2020 year. I want connect mib3 on bench. Two big pins is power, but another six pins?

[mobista]

Same like PCM4.1/PCM5.0/PCM6.0.

[goontii]

I cant find pinout for pcm5.0 for example . Maybe you have and can you share this?

[Versus]

1-CAN-H
5-CAN-L
4- 12v
8- GND

[n3oka]

Look the picture at the attachment

[goontii]

For connect on bench is it enough connect power and can-H and can-L and LVDS? I connect but display not start

[n3oka]

Check the CAN bus. If the wires are swapped, the display won't start. Usually, the image signal, 12V, GND, CAN-H, and CAN-L are sufficient.

The display starts as soon as it receives the signal via the CAN bus from the 5F control unit.

[goontii]

Yes you have right. I connect only can H and can L and display start but all time shows loading settings. Probably not compatybile display with mib3 unit

[DukeFawks]

Of course any MOI3 will hang on loading the user profile when no OCU3 is connected. User profile can be disabled in adaptions. LG needs SFD for this while Preh does not....

[mobista]

Of course any MOI3 will hang on loading the user profile when no OCU3 is connected. User profile can be disabled in adaptions. LG needs SFD for this while Preh does not....

LG doesn’t need SFD  some trick can be applied by command when communication is turned on