[uh60]

Hey,

I have an Audi A4 B9 with an airbag module 8W0959655G with crash data in it.
I was wondering If I can reset the module with Launch V28.95 or an original VCDS? I have both.

Or if I decide to buy and install a non-faulty new module, do I need to "teach" the main ECU or something else?

I have a "clean" bin file for the EEPROM, but i'm not sure how to upload it to the module. While working with EZP 2023, it read the EEPROM as a different manufacturer and model, not EEPROM 95128, so I don't want to continue on that path at the moment.

Any help would be appreciated!

[tigre]

hi, you need to read eeprom 95128, after read with any eeprom reader you can upload here

regards

[al70]

heres a cheap programmer, read and post the file like tigre
said and someone will correct your file

[Lifestyle]

Hey,

I have an Audi A4 B9 with an airbag module 8W0959655G with crash data in it.
I was wondering If I can reset the module with Launch V28.95 or an original VCDS? I have both.

Or if I decide to buy and install a non-faulty new module, do I need to "teach" the main ECU or something else?

I have a "clean" bin file for the EEPROM, but i'm not sure how to upload it to the module. While working with EZP 2023, it read the EEPROM as a different manufacturer and model, not EEPROM 95128, so I don't want to continue on that path at the moment.

Any help would be appreciated!

check dtcs with vcds and post it here
post only dtc codes which cannot be cleared with vcds

[uh60]

DTCs cleared and attached to this comment. I used Launch but VCDS gave me the same result.

[uh60]

Hey,

I have an Audi A4 B9 with an airbag module 8W0959655G with crash data in it.
I was wondering If I can reset the module with Launch V28.95 or an original VCDS? I have both.

Or if I decide to buy and install a non-faulty new module, do I need to "teach" the main ECU or something else?

I have a "clean" bin file for the EEPROM, but i'm not sure how to upload it to the module. While working with EZP 2023, it read the EEPROM as a different manufacturer and model, not EEPROM 95128, so I don't want to continue on that path at the moment.

Any help would be appreciated!

check dtcs with vcds and post it here
post only dtc codes which cannot be cleared with vcds

Any ideas buddy ? I have uploaded the log in the post above