Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
E53 LCM Clone
19-03-2024, 18:45 PM,
Post: #1
|
|||
|
|||
E53 LCM Clone
Hi,
i have an burned E53 LCM III I would like to buy a used one and clone it, is it possible with upa, r270 or cgpro ? Has anyone an idea? Best regards |
|||
19-03-2024, 18:57 PM,
(This post was last modified: 19-03-2024, 18:59 PM by bmchicago.)
Post: #2
|
|||
|
|||
RE: E53 LCM Clone
pasoft bmw scanner 1.4
make sure you correct mileage first and then vin. |
|||
19-03-2024, 20:48 PM,
Post: #3
|
|||
|
|||
RE: E53 LCM Clone
|
|||
20-03-2024, 12:55 PM,
Post: #4
|
|||
|
|||
RE: E53 LCM Clone
Quote:Unfortunately the Lcm is completely dead. And i want to do it on bench. Is there a chance to clone the whole eeprom/mcu?Yes, it's possible. You can use a tool which support ECU mask set (CGPro / Orange / VVDI / XProg). |
|||
20-03-2024, 13:32 PM,
Post: #5
|
|||
|
|||
RE: E53 LCM Clone
(19-03-2024, 20:48 PM)maninblack Wrote:(19-03-2024, 18:57 PM)bmchicago Wrote: pasoft bmw scanner 1.4 You do not need original LCM. Buy used LCMIII or LCMIV and reset mileage to 0 and then change VIN with bmwscanner 1.4. then use NCS to encode it. no need to use bench or open up. |
|||
23-03-2024, 05:27 AM,
Post: #6
|
|||
|
|||
RE: E53 LCM Clone
Yes sure. But I don’t have physical access to the vehicle.
I only have the Lcm. Maybe someone can help with the pinout? |
|||
23-03-2024, 08:51 AM,
Post: #7
|
|||
|
|||
RE: E53 LCM Clone
(23-03-2024, 05:27 AM)maninblack Wrote: Yes sure. But I don’t have physical access to the vehicle. post clear picture of front and back pcb Don't PM me for SW keys, FRM, Licences, radio codes or similar, you will not get any answer...
|
|||
23-03-2024, 08:53 AM,
Post: #8
|
|||
|
|||
RE: E53 LCM Clone
Try vvdiprog software, there was many diagrams, also I remember that i see lcm for e53 there
if helpful, give tnx or rep, see u !
|
|||
23-03-2024, 16:04 PM,
Post: #9
|
|||
|
|||
RE: E53 LCM Clone
This is was VVDI show.
|
|||
25-03-2024, 09:59 AM,
Post: #10
|
|||
|
|||
RE: E53 LCM Clone
My pcb looks slightly different.
I attached three pics |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
FRM repair and clone DME & DDE | jaki | 27 | 1,618 |
01-03-2024, 22:52 PM Last Post: r0my81 |
|
FEM MODUL CLONE | arcelik | 10 | 602 |
19-02-2024, 10:16 AM Last Post: bm92 |
|
BMW AOS ACCOUNT+ ICOM CLONE? | Aldi | 17 | 2,868 |
10-01-2024, 15:22 PM Last Post: eXslide89 |
|
[RESTARTED] icom next clone repair (only single pcb) | ____ANGEL___ | 46 | 4,894 |
26-10-2023, 23:40 PM Last Post: ferrum |
|
ista icom clone | Elias1004 | 11 | 1,005 |
06-10-2023, 17:42 PM Last Post: ferrum |
|
Bmw G30 ecu clone md1cs001 | brabus | 6 | 1,084 |
08-09-2023, 21:05 PM Last Post: yuko |
|
NBT EVO ID4/5/6 - hdd clone and Asia conversion | anstr | 5 | 883 |
19-08-2023, 09:23 AM Last Post: DEJMIEN |
|
Firmware icom next oem no clone | santopalermo | 1 | 399 |
09-07-2023, 11:07 AM Last Post: ImmBoo |
|
Icom A2 Clone doesnt read VIN | BMWM235i | 7 | 600 |
14-05-2023, 20:30 PM Last Post: sparky001 |
|
CIC HDD clone | fl3xy | 4 | 1,405 |
26-03-2023, 17:19 PM Last Post: Rajco |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content