[Bimmerwerks]

As mentioned in the title, I used Hutools to perform FSC work on the 2015 model F82 M4 vehicle to update the 2024 NBT_EVO map.

After completing the Hutool work, I updated the 2024 map data using USB. It was completed smoothly, and I was able to check the updated map version through the iDrive menu.

However, for some unknown reason, the loading was repeated, so I used Hutool once again, but the situation was still the same. I also tried using the featuring installer just in case, but the situation did not change.

I tried to process it using ESYS, which is another method, but an error occurred when I did READ after Store FSC. I tried to search for this through Google, etc., but I couldn't find the answer either.

I checked through FSC inquiry, but I don't know what the problem is. I wish someone could give me some advice.


Here, I will upload the vehicle identification number, FSC status, and images of situations that occurred during work.

---

WBS3R9109GK454857


Reading FSC status
FSCs status:
006F0001: NotAvailable
009C0001: Accepted
009E0001: NotAvailable
009F0001: NotAvailable
00A10001: Accepted
00E50001: Accepted
00F30076: NotAvailable
012E0076: Accepted
01430001: NotAvailable
016E0001: Accepted
016F0001: Accepted
01700001: NotAvailable
Complete.

[bimmerlab]

It's a Hutool defect. need to create a new a1 fsc. It doesn't happen automatically.

[Bimmerwerks]

It's a Hutool defect. need to create a new a1 fsc. It doesn't happen automatically.

I guess that's true... I guess there's no other way than to add a new FSC. If you know how to get the original FSC, please let me know. Or maybe you can help?

[bimmerlab]

It's a Hutool defect. need to create a new a1 fsc. It doesn't happen automatically.

I guess that's true... I guess there's no other way than to add a new FSC. If you know how to get the original FSC, please let me know. Or maybe you can help?

i think this car is korean car. 
is that right? 
i am in korea

[Bimmerwerks]

Yes, that’s right, Korea.

Fortunately, it went well. I think it was a HU-TOOL problem.


It's a Hutool defect. need to create a new a1 fsc. It doesn't happen automatically.

I guess that's true... I guess there's no other way than to add a new FSC. If you know how to get the original FSC, please let me know. Or maybe you can help?

i think this car is korean car. 
is that right? 
i am in korea