Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Reflash lexia interface from B to C
03-01-2016, 11:33 AM,
Post: #31
|
|||
|
|||
RE: Reflash lexia interface from B to C
(28-07-2015, 10:27 AM)mattydr67 Wrote: The serial it is allready blacklisted in the DB v7.66 and on in fw 4.3.3 Hi mattyde67, Is this nlc serial different from the ones on the clones? Wouldn't all the clones have the same serial; and it is easy to block?? Isn't it possible to edit the "vci_updater.com" and change the name and serial manually? Please elaborate on the answer, I have only 1 Full Chip C revision XS Evolution (Lexia) device, that I may use three times a year. So I cannot check variances.. |
|||
04-01-2016, 10:41 AM,
Post: #32
|
|||
|
|||
RE: Reflash lexia interface from B to C
Open the "vci_updater.com" with a HEX Editor and read what Mr. NLC wrote in it.
I use my tool from time to time but what I wanna tell you is that when I bought my clone from china ( full chip with S/N 963830 C ) I tested as it is before reflash it with Mr. NLC vci_updater.com and in some cars that I know 100% that a "B" clone didn't worked before this "C" clone didn't worked too. Then I tested it again in same cars after I flashed with Mr. NLC vci_updater.com. And all worked 100% I took my clone for a long now so I do not rememeber when I did this tests but if I rememebr well was in May 2013 This are my tests that I did. What will be we will see. Conclusions are yours Good luck |
|||
04-01-2016, 12:35 PM,
Post: #33
|
|||
|
|||
RE: Reflash lexia interface from B to C
I did look into the file some time back, the file I have is for someone from (Staffordshire, UK), in fact I put a request to get a different file so that I identify the area of change. Do you have a different file?
Also: (04-01-2016, 10:41 AM)mattydr67 Wrote: I bought my clone from china ( full chip with S/N 963830 C ) I tested as it is before reflash it with Mr. NLC vci_updater.com and in some cars that I know 100% that a "B" clone didn't worked before this "C" clone didn't worked too. You mean to say that flashing your "C" Revision Full Chip device with NLC firmware allowed it to work with cars it could not work with, before the flash! Which DiagBox version were you testing with? I am asking because someone was saying that Revisions "C" clones have been blocked in DiagBox v7.66+. If that is true, then the solution is by editing "vci_updater.com" and changing the serial number in the file and re-flashing it.. |
|||
04-01-2016, 15:44 PM,
Post: #34
|
|||
|
|||
RE: Reflash lexia interface from B to C
As I said I don't remember. I did it in May 2013, sorry
As I remember the last version that I tested with my flashed tool was 7.65 or 7.66 but I cannot tell you exaclly. As I said I use it very rare. But as soon I will have oportunity to do a test I will tell you. Ok if you wanna play you can edith the serial in the vci_updater.com. But take care. Good luck |
|||
04-01-2016, 16:13 PM,
Post: #35
|
|||
|
|||
RE: Reflash lexia interface from B to C
I have posted DiagBox v7.72 which I successfully tested, which means my device is not blocked. This is why sometimes what people are reporting probably apply to their setup only.
I have also compiled DiagBox v7.79 (using 8.10-8.15 updates) last week, which seems functioning fine; but I really hardly use the devise. However, your experiment is important to may people who may not be able to access their cars with their current Revision "C" devices. I think you should start a new thread about it. |
|||
05-01-2016, 08:52 AM,
Post: #36
|
|||
|
|||
RE: Reflash lexia interface from B to C
(03-01-2016, 11:33 AM)Simple Wrote:(28-07-2015, 10:27 AM)mattydr67 Wrote: The serial it is allready blacklisted in the DB v7.66 and on in fw 4.3.3 If you edit the "vci_updater.com" and change the name and serial manually you will brick your interface. NLC was made flash for everyone personally , there is a checksum for all info inside , the reason are sellers. |
|||
05-01-2016, 10:19 AM,
Post: #37
|
|||
|
|||
RE: Reflash lexia interface from B to C
|
|||
11-01-2016, 14:42 PM,
Post: #38
|
|||
|
|||
RE: Reflash lexia interface from B to C
Please, is there working solution to update firmware? Or need replace pic maybe? Make offer....*'
Was I helpful? Please support my time and Hit And -button's. NEW Trasdata 9 Master support Bosch SM(service mode) etc |
|||
11-01-2016, 16:23 PM,
Post: #39
|
|||
|
|||
RE: Reflash lexia interface from B to C
|
|||
20-08-2016, 20:34 PM,
Post: #40
|
|||
|
|||
RE: Reflash lexia interface from B to C
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content