[bboctavian]

Hello, i have a vw phaeton with kessy continental ecu nr: 3D0 909 139D

i buy second hand kessy with same nr, read both with VVDI prog (the old ecu is damage by water) how can i adapt?

Old ecu: 3D0 909 139D
PIN: 17695
CS: 96 03 D1 56 40 F2 EB

New ecu: 3D0 909 139D
PIN: 56357
CS: 83 5C D9 D2 68 81 42

 I upload both read from ori and donator ecu.

I have vcds ori, key tool pad, svci 2020

thanks

[raffy haddad]

You should be able to do with key pad but you need mac and power class
Choose adaptation on your key pad and check
Regards
Ps continental need read in circuit

[bboctavian]

On key tool plus can't find function about adaption or renew kessy.. just to add key

Yes is read in circuit with vvdi prog

[raffy haddad]

I have vvdi2 and exist on on key tab same functions asvvdi2 should be

On special function

[bboctavian]

In xhorse key tool plus is nothing about that, i think just on vvdi2 is.

I have somethink in avdi but ask me about power class of the ecu. can i read the power class from the engine ecu with vcp ? or need to read full backup ?

[raffy haddad]

With vcp expert who use vcp can advise
Personally not have vcp

[bboctavian]

I manage to get a autel to make the swap, but i can't wake up the ecm ecu and i need the power class of the engine ecu...
autel ask me about the power class of the ecu..

how can i wake up engine ecu ?

 I upload full read of ecm eeprom and flash can someone help me with power class ?