[Ciba]

Hi everyone,
after I tried all my ideas it is time to ask here.

I have Golf 7.5 TCR that originally was 213kW (engine code DNUC). Customer bought it without engine and ECU and then bought engine and ECU in pair from G7 gti 180kw (engine code DLB).

So now I have golf that was 213kw and engine+ecu 180kw.

Both these ECUs are Simos 18.10 06K907425J, but there is difference in VAG part number, original (213kw) was 8V0906259R, and ECU that I have now is 5g0906259S.

Because of different part number odis was not able to make SVM so I did manually coding and get rid of Incorectlly coded ECU fault code.

Problem is when I try to adapt Immo it says that Process is completed successfully but it does not adapt immo in ECU, ECU locked fault code.

I got info that it is because of different power class and that I should flash ECU with file from 213kw ecu and then adapt IMMO. (flash is not possible with odis because immo is not active, so it needs to be done with tuning tool).

Then I tried to flash it with kess3 but if I try with OBD it is not possible FILE NOT COMPATIBLE WITH READ FILE OBDModified.

Now I am interested if someone did it before, because I would try to do it with BOOT mode, am I wasting time or there is possibility that I gonna be able to do it with BOOT?


DO I have any other options? 

Thanks in advance