[BS68]

Hi friends, 

I have a 2010 E71 X6 740D, the 8hp transmission has been replaced, the car starts but stays in "Neutral" gear with flashing. 

How to perform a reset or coding please ? namely, i am not from Icom nor explorer, i have fvdi 14/18, launch and the whole inpa family, tool32, NCSexpert... 

Thank you in advance for your support.

[johann74270]

hello you need to program ISN of the gearbox

[BS68]

Thank you for the answer dear friend Johann, i will look for how to successfully extract the original isn which must be in the (cas) or (dme), then program in the gearbox, it will be complicated for a newbie like me but i will do some research.

Respect to you.

[ben1978]

You don't need to extract anything from DME or CAS, you need reset(clear) EGS ISN

[Ryzen]

You don't need to extract anything from DME or CAS, you need reset(clear) EGS ISN

How is this done? What tools are needed to reset the e series 8hp?

[EngineerX]

This version can also be carried out remotely after having reset the ISN and reprogrammed the EGS with the new Firmware without having to remove it from the car