[Albert2K6]

Hi, I have 2 clusters dashboards for Audi A4
The original one (damaged for short-circuit in the car fuses) and the new one which we got from a junk car same model.

How can I clon (or modify the new one) the original one into the new one ?

Enclosed both files (OLD=ORIGEN and NEW ONE=DESTINATION)
Best Regards...

Dashboard Instrument Cluster
Audi A4 Year of made  1999 or 2002

-OLD- Origin
Dash Cluster -> 8D0920930M kombi+wegfahrs m73 d17
ORIG REAL KM: 324604
Pin 02611
Km 324584
VIN:AUZ5Z0B1168098
Chip -> HC912DG128  without CRC - V2
----------------------------------------------
----------------------------------------------
-NEW- Destination
Dash Cluster 8D0920932FX VDO
pin 7165
km:510192
VIN:AUZ7Z0I2825810
Chip -> EEPROM:93c86

[sivyx]

Change cluster, add new key transponder, adapt ECU to immo.
Or change cluster and make ecu immo off, but you will have immo light on dash, Just tape it

[-Harry-]

beat me if i'm wrong, but why don't you just adapt it the right way, when you have both login codes?

first dash to ecu, then keys to dash.

[23Andi23]

Try this file but not sure if it work. New one should be Immo3 but no VIN is stored. Immo ID, Keys, Pin and mileage are transfered try it and report. But you can adapt it easy by vcds.