Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Retrofitted EntryNav sometimes doesn't start correctly
01-04-2024, 09:39 AM,
Post: #1
|
||||||||||
|
||||||||||
Retrofitted EntryNav sometimes doesn't start correctly
I replaced a Mini Visual Boost (Entry) with an EntryNav and added an activator and GPS antenna. I added 6UM to the FA and coded the EntryNav accordingly. The car has MINI-connected, but no active subscription. Now, occasionally the unit stays in "starting navigation", but after the vehicle goes to sleep it works correctly afterwards. If this happens, it is not possible to make a call via Bluetooth and there is a check-control message about Cruise Control not working. The only DTC stored is for not receiving a GPS signal for 40 KM. I tried to update the unit, but the HWEL does not match. I attached the FA, current SVT and target SVT. Current HWEL = 00001703.004.002, Target HWEL = 00001704.003.003 Current BTLD = 00001ABA.110.001.04, Target BTLD = 00001ABA.130.026.001 My questions: - Is it possible that updating to the newer software will fix the issue? - If so, how can I modify the FA in such a way that it accepts my HWEL? - Or is it safe to ignore the differences in HWEL since the BTLD has the same ID? Thanks in advance for any help!
|