[Sal86]

I have a problem on a BMW F20 116d with edc17c50;  I have made tons of this ecu but on this car after mod the bmw generic edc17 dpf bit the car have no power.
the dpf bit are two:

3A173D   -  Schalter zur Partikelfiltersoftwareaktivierung EEPROM Ersatzwert
3A173E   -  Schalter zur Deaktivierung der Partikelfilter-Funktionalität

If I mod both to 0  then the car not accellerate,   if I mod only the first to 0 the car have power  but after undred km the car start to regenerate.

Until now I found this problem only on this 116d.

Has anyone had this problem and fixed it?

I made the file with switech, flixweve, DEF, davinci deluxe, ESS, I also sent it to swiftech support and davinci deluxe support but they didn't solve it can you please help me

FLASH_IntFlEDC17C50_ORIGINAL.rar
File Type:
Downloaded:	11 times
Size:	1.36 MB

DaVinci_Deluxe(BMW BOSCH EDC17C50_DPF_).rar
File Type:
Downloaded:	9 times
Size:	1.35 MB

(SWIFTECH)BMW_EDC17C50-C56_BMW_F20_116D_(DPF_EGR).rar
File Type:
Downloaded:	10 times
Size:	1.36 MB

FixWave (BMW - Mini EDC17C50-C56_FLASH_IntFlEDC17C50_(DPF) NoChk).rar
File Type:
Downloaded:	10 times
Size:	1.36 MB

[Jurebv]

do dpf off without the switch

[foxportal]

test and report 

pass to pm

[Sal86]

hi friend the machine is not yet back to do the file test but i checked the file and you tapped the switch
3A173D - Schalter zur Partikelfiltersoftwareaktivierung EEPROM Ersatzwert
3A173E - Schalter zur Deaktivierung der Partikelfilter-Funktionalität
And I've already explained that any person or SW touches them the machine has no power I've tried a lot of maps

[bradsm87]

Those addresses look correct and should work.

Flash a stock file, do a DPF reset with ISTA then flash the modded file. My guess is it's an issue because a DPF regen request is already in place.

[foxportal]

If you have any problems returning to stock, write a PM and I will help.

[Jurebv]

write this and done, no need to reset or unplug

WinOLS (BMW 1er (dpf egr) - 523208).rar
File Type:
Downloaded:	12 times
Size:	1.36 MB