[ELMEPRO]

Holla, today is my mistake day, its my own VW Crafter i accidently flashed wrong file, good new is that is from same engine and ecu but diffrent sw part nummber, i cant flash ori because pcmflash show me that there are imo failure, what shuld be my next move?

ori 04L906056SK flashed 04L906056KL
Ecu is not dead, look like long code is gone

I have Pcmflash and vvdiprog.

---

Is it WORTH to try geko? i have hard feeling that geko will refuse because off different soft.

[MahoJohn]

Holla, today is my mistake day, its my own VW Crafter i accidently flashed wrong file, good new is that is from same engine and ecu but diffrent sw part nummber, i cant flash ori because pcmflash show me that there are imo failure, what shuld be my next move?

ori 04L906056SK flashed 04L906056KL
Ecu is not dead, look like long code is gone

I have Pcmflash and vvdiprog.

---

Is it WORTH to try geko? i have hard feeling that geko will refuse because off different soft.

hi, read the ecu in boot, upload here 
i will help you,

geko will not help you.

[sivyx]

Why geko?? If it have communications use odis e with frf file from MahoJohn. BTW I don't understand why there's a need to password-protect publicly accessible files?? You can finde it in flashdaten on vag subforum.

[MahoJohn]

Why geko?? If it have communications use odis e with frf file from MahoJohn. BTW I don't understand why there's a need to password-protect publicly accessible files?? You can finde it in flashdaten on vag subforum.

hi,

if you flash wrong frf file to dcm6.2 the ecu will block, the immo is damage, and without right immo you cant via obd nothing,

maybe if you adapt the immo with geko you are again able to write via obd, but the car still wouldn't start without the correct frf file, and then you can try to write the correct frf file on it

read via boot, then correcting the file is the best solution, which I personally have done successfully

ohh, really you find the frf file? so upload it.

[dimitar]

Frf update via odis engineering doesnt touch immo even if you flash wrong software

[sivyx]

FL_04L906056SK_9970__V001
FL_04L906056SK_9971__V001
FL_04L906056SK_9973__V001

MahoJohn overall he's right.. But just try with odis-e nothing to lose..

[ELMEPRO]

INFO

im waiting for mdflash to do bsl

Immo is defective i tried geko it refuse.

If immo defective or ecu locked fault, you cant flash it even trought odis e

[MahoJohn]

INFO

im waiting for mdflash to do bsl

Immo is defective i tried geko it refuse.

If immo defective or ecu locked fault, you cant flash it even trought odis e

if you read read via boot (flex and kess do it) or bench (kess do it)
upload file here i will repair file

[sivyx]

Dfox and fgtech via bench too.. Tagflash have boot in list..

[ELMEPRO]

SOLVED

Fixed file and didn't even needed geko, had long code backup everything ok!