Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Vediamo 5 config VXDIAG MTS 6532
09-04-2024, 15:05 PM,
Post: #1
|
|||
|
|||
Vediamo 5 config VXDIAG MTS 6532
HI!
I tried to configure Vediamo 5 with VXDIAG. the serial number is the same as in the picture described, but it does not connect to any ecu, while it works with passthru, can anyone help me? any information about this? |
|||
09-04-2024, 15:59 PM,
Post: #2
|
|||
|
|||
RE: Vediamo 5 config VXDIAG MTS 6532
This setting only works with older CBFs from DAS. This is due to the old version of CEASAR that comes with Vediamo 5. It does not support either CBF from Xentry or SMR. To make it work, you need to embed the new CEASAR into Vediamo, but to do this you need to have the Vediamo source code. If you are a developer, you can do this easily. If you are not a developer, then forget about it.
|
|||
09-04-2024, 16:22 PM,
Post: #3
|
|||
|
|||
RE: Vediamo 5 config VXDIAG MTS 6532
(09-04-2024, 15:59 PM)motorotor Wrote: This setting only works with older CBFs from DAS. This is due to the old version of CEASAR that comes with Vediamo 5. It does not support either CBF from Xentry or SMR. To make it work, you need to embed the new CEASAR into Vediamo, but to do this you need to have the Vediamo source code. If you are a developer, you can do this easily. If you are not a developer, then forget about it. thanks for the information.. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content