[gmc1103]

hello

I have retrofited TPMS in my A3 8V.

The 8s0907273 module was faulty but working, i had the tyres pressure but it was always trigerring errors in my VC.
I bought a new one, set the dataset to A3, but now i can't get the tyres pressures and i have the following error

C111A31 Tire pressure sensor (one or more), No signal

I have made a reset in 5F but after driving some km the error popup again

Code:

----------------------------------------------------
Address 65: Tire Pressure Monitoring System (TPMS)
Description: RDKHUFAU736 J502
Coding:
SW: 8S0907273A 0002
HW: 4M0907273C H04
Serial: 30000000001943 VCRN:
ODX: EV_RDKHUFAU736 002007
Readed DTC:

802502 (C111A31), Test failed
Confirmed DTC...
Tire pressure sensor (one or more) No signal
Tire_pressure_sensor_no_receiving
Priority: 4
Unlearn count: 55
Mileage: 51304 km
Date: 13.04.24 16:41:31
Counter: 1
C12018 (U112100), Confirmed DTC
Databus missing message
Timeout_Kombi_01
Priority: 6
Unlearn count: 97
Mileage: 16777215 km
Date: --.--.--
Counter: 1
C12007 (U112100), Confirmed DTC
Databus missing message
Timeout_ESP_21
Priority: 6
Unlearn count: 97
Mileage: 16777215 km
Date: --.--.--
Counter: 1
C12020 (U112100), Confirmed DTC
Databus missing message
Timeout_Systeminfo_01
Priority: 6
Unlearn count: 97
Mileage: 16777215 km
Date: --.--.--
Counter: 1

----------------------------------------------------

Any help please?

[gmc1103]

nobody helps??
I can't believe

[pupu144]

So I guess this direct TPMS system? Like, sensor is in every wheel?
And you have just replaced old module with a new one, without any additional actions?

Have you performed any sensor learn procedure after swapping the module? (possibly need to write unique IDs for each sensor back to the module)

And regarding the other errors - have you performed repairs without disconnecting the battery? It may look like that car have "lost" this TPMS module from the installation list, that's why you may have this errors. Possibly need to perform Actual Installation procedure in Gateway module.

However, better get your hands on a working copy of ODIS.
Do a scan and perform GFF repair steps. It should fix everything for you easily.

[gmc1103]

So I guess this direct TPMS system? Like, sensor is in every wheel?
And you have just replaced old module with a new one, without any additional actions?

Have you performed any sensor learn procedure after swapping the module? (possibly need to write unique IDs for each sensor back to the module)

And regarding the other errors - have you performed repairs without disconnecting the battery? It may look like that car have "lost" this TPMS module from the installation list, that's why you may have this errors. Possibly need to perform Actual Installation procedure in Gateway module.

However, better get your hands on a working copy of ODIS.
Do a scan and perform GFF repair steps. It should fix everything for you easily.

Thanks for your reply.
Yes, sensors in evary wheel
Just replaced, sent parameters for A3 8V
I did not disconnected the battery 
The module is gateway, i can see 65, i can communicate, the sensors are ok, went to a tyre store to check them
I have ODIS, how to do this?

[pupu144]

To me it still looks like you just need to write TPMS transmitters ID back to module - otherwise, how would it know where to get readings from?

As for ODIS - well, do a scan, it will find faults and would generate a repair action plan for you. Follow these steps to resolve your issue(-s).
Or select only the TPMS module, and under Adaptations or Guided Functions there should be some re-learn procedure.

[gmc1103]

Hello, there is no guided function. How to write sensor id?