Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
G01 2019 X3 - ATM Replacement/Coding Help Needed
16-04-2024, 19:32 PM,
Post: #1
|
|||
|
|||
G01 2019 X3 - ATM Replacement/Coding Help Needed
Hey Guys,
Need some help with a module I had to replace. I have a 2019 X3 M40i. Got the Emergency Call System Malfunction error and out of warranty. I already have replaced the Antenna, the ATM-01 (Telematics Module), and the backup battery. And obviously reseal. I was able to code the ATM-01 Module using esys following these steps. "Connect => Read FA (VO) => Activate FA (VO) => Read (ECU) => Left-Click on desired ECU => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown (bottom one) => Select OK => Right-Click on ECU (the ECU itself not the underlying CAFD) => Select CODE." Doing this has cleared the Emergency Call System Malfunction error on my instrument cluster. However some things still aren't working as they did prior to replacement. - App is showing updated status of locked/unlocked and where the car currently is. However I cannot use the remote 3d view, cannot lock/unlock the car remotely. - Cannot perform any of the emergency call functions either. The internet does seem to be working on the car as I am able to access weather, news, update bmw assist, etc. All of this was replaced with brand new hardware straight from the dealership. Any suggestions to get the app back to fully working and my sos button working again? |
|||
16-04-2024, 20:36 PM,
Post: #2
|
|||
|
|||
RE: G01 2019 X3 - ATM Replacement/Coding Help Needed
(16-04-2024, 19:32 PM)jchisholm17 Wrote: Hey Guys, you dont see any faults to report? |
|||
16-04-2024, 21:03 PM,
Post: #3
|
|||
|
|||
RE: G01 2019 X3 - ATM Replacement/Coding Help Needed
Did you buy new module or second hand?
If second hand, i think you should move eSim from old module! (you can find picture of it on forum) Also should remain old imei which i don't know how to move, this should be the problem! |
|||
16-04-2024, 21:07 PM,
Post: #4
|
|||
|
|||
RE: G01 2019 X3 - ATM Replacement/Coding Help Needed
(16-04-2024, 21:03 PM)tito2002 Wrote: Did you buy new module or second hand? You have read this. … All of this was replaced with brand new hardware straight from the dealership… If my post helped you hit the thanks and reputation button. Thank you.
|
|||
16-04-2024, 21:31 PM,
Post: #5
|
|||
|
|||
RE: G01 2019 X3 - ATM Replacement/Coding Help Needed
atm needs validating, then all services needs refreshing
NBT EVO Apple CarPlay, Navigation, Video in Motion
Speed limit activation for KAFAS 2 and 4 EntryNav EVO Apple CarPlay Programming and Coding BMW FSC CIC/NBT/EVO |
|||
16-04-2024, 21:37 PM,
(This post was last modified: 16-04-2024, 21:38 PM by jchisholm17.)
Post: #6
|
|||
|
|||
RE: G01 2019 X3 - ATM Replacement/Coding Help Needed
See attached error reports
Those are from Bimmerlink. When I run a scan in Bimmerutility I get the following errors. B7F4BC - AMPT No Rad_ON signal even though the engine is running. E1C600 - Head Unit Ethernet unexpected communication termination 800AC5 - KAFAS Camaera window heating : short circuit to B+ or open circuit. (16-04-2024, 21:31 PM)pcp1234 Wrote: atm needs validating, then all services needs refreshing How do I go about this? |