Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
G01 - lost communication with DSC but it's working
29-04-2024, 13:30 PM,
Post: #1
|
|||
|
|||
G01 - lost communication with DSC but it's working
Hi!
I have updated whole car using ISTA and 4.46.51 SDP but it didn't flash DSC and ISTA marked it with red X in Test Plan. Now I can't communicate with DSC using Ista and E-sys. HOWEVER it seems DSC is working fine because I don't see any "missing CAN messages" codes and I can turn on and off DSC. No error on dash. Recovered SVT from backup - didn't help Reinitialised Flexray - didn't help Checked Flexray ports using Tool32 and I have only PFAD 0 and PFAD 1 opened. When I open manually rest of it nothing changes. I had similar case with G30 but it lost communication with EPS - same scenario - no communication but EPS works fine. Anyone have an idea? |
|||
29-04-2024, 13:32 PM,
Post: #2
|
|||
|
|||
RE: G01 - lost communication with DSC but it's working
Try to write SVT Target manually in VCM with esys. after TAL calculation save it, and write it. often restores it back
|
|||
Reputation: +1 - Krysiaman [+1] | |||
29-04-2024, 13:36 PM,
Post: #3
|
|||
|
|||
RE: G01 - lost communication with DSC but it's working
yup, its just communication error. need svt write.
|
|||
Reputation: +1 - Krysiaman [+1] | |||
29-04-2024, 14:31 PM,
Post: #4
|
|||
|
|||
RE: G01 - lost communication with DSC but it's working
Solved!
Somehow E-SYS 23.10 couldn't write new SVT_SOLL in VCM. Used E-SYS 3.40 and it worked flawless. Thank you guys! |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content