[19ghost66]

Hello everyone, I was able to install vmware ETKA on but I can not do updates. They are firm to:
  VW 1051 - SEAT 577 - 583 SKODA - AUDI 1051
how and where I can find any new updates? installation are present only for the 1990-1993 Audi etc etc.

Who can help me and as you bring updates manually?

[glx125m]

Thank you very much.

[Slowboat]

Hello everyone, I was able to install vmware ETKA on but I can not do updates. They are firm to:
  VW 1051 - SEAT 577 - 583 SKODA - AUDI 1051
how and where I can find any new updates? installation are present only for the 1990-1993 Audi etc etc.

Who can help me and as you bring updates manually?

I know it's a bit late but in case if any one else want to know.
You can manually download the files and copy them into the EKTA update folders. I'll explain it below.

The web address for VW and Audi update files are in the attached file.
Unfortunately I can't remember the Skoda and SEAT ones as I don't use it. Let me know if you do need these two and I'll try to get them for you.

Instruction for VW:
Change the number, between "etupvw" and "d.exe" for the version number. For example if you need version 1094 for VW this how the exe file will look at the end of the address:
etupvw1094d.exe

This is the same for Audi, for example if you want version 1102:
etupau1102d.exe

Note that you must have all the previous versions. For example if you're on version 1023 and want to update to the latest version, lets say 1099, you must download all files from 1024 to 1099.

Once you've downloaded the update files copy them into the following folders:
For VW:
"Your drive plus any other folders that you've installed EKTA in"\ETKA\DATA\VW\Update. In my case the full path is "C:\ETKA\DATA\VW\Update".

For Audi:
????\ETKA\DATA\AU

Start EKTA and it will ask if you want to update. Click Yes/Ok to update.

The latest version is 1107 but you would need EKTA 7.5 version for this. Some around version 1088 to 1092 and above yoy would need EKTA 7.5.

You can carry on using 7.4 by turning back your PC date to end of last year.

Hopefully that helps.

[Big Thor]

Is there a different URL to use if I am in the USA and using the International Version and not the German Version? I read somewhere that I had to change the last part from "d.exe" to something else like "i.exe" or "0.exe". For the life of me I can't find that information again.

Your Post was very helpful SlowBoat

[pbrotea]

Is there a different URL to use if I am in the USA and using the International Version and not the German Version? I read somewhere that I had to change the last part from "d.exe" to something else like "i.exe" or "0.exe". For the life of me I can't find that information again.

Your Post was very helpful SlowBoat

Use these for USA

[adxinnixda]

Hallo, i know this is very old but pherhaps there is someone who can tell me if its still possible to update the old etka 7.4 from tekkno on a VM whith XP ?

Thanks

[sunaj]

Hallo, i know this is very old but pherhaps there is someone who can tell me if its still possible to update the old etka 7.4 from tekkno on a VM whith XP ?

Thanks

Nope