[BMWF01]

Menu Option .......................................Description

View KMM_BACK.DAT

Contains a list of incompatibilities between ECUs, type keys,
integration levels etc.

Is only used in KMM backup mode instead of KMM, see
NFS.INI

View NOTFALL.DAT

List of the ZB-numbers allowed for emergency flashing.

View ZB_CHECK.DAT

List of the ZB-numbers of the ECUs to be checked.

View I_STUFE.DAT

Contains the target integration level.

View NFS_01_24.DAT

Programming diary. The file name consists of the name of the
facility (in this example NFS_01) and the calendar week (24).

Contains each flash process conducted together with the result
(OK or not OK). A new file is started each week.

View FZG.TMP

All information about the last processed vehicle. Is overwritten
with the next vehicle.

View ZB.TMP

List of all ZB-numbers that can be programmed via WinKFP
(details about the performance of the WinKFP version used).

View FA.TRC

List of all tested vehicles with details about the equipment
(chassis number, type keys, special equipment)

View ID.TRC

List of all tested vehicles with the ID data of the individual
ECUs.

View KMM.TRC

List of all modification plans for the vehicles supplied by
KMM.
A maximum of 10 modification plans can be called up
per vehicle. However, only the first modification plan is
executed, the further modification plans merely serve for
diagnosis.

View KMM_BACK.TRC

Contains the results of the KMM backup solution (alternative
to KMM when the option KMM_BACK=JA is activated).

View CASCADE.XML

XML file that was generated as a result of a CASCADE call-up
(only in CASCADE operation).
In case of OK, contains the modification plan, if not OK, merely a description of the error.

View FLASH.PRT

Result (feedback) from WinKFP after termination of an order
(e.g. flash order). In multi-channel operation, one sub-menu
with one item per channel is offered.

View ERROR.TRC

List of all errors, warnings and user interferences.
Warnings can be turned off via the entry WARN_Log in the
section [TRACE] in the NFS.INI.

[andy71]

Hi Bmwf01,please to know how to use nfs?

[BMWF01]

Hi Bmwf01,please to know how to use nfs?

I use only winkfp to do flashing by Enterzb then add 17 vin then click done then click the program button. then wait for it to finish with programming OK.

I have never use NFS before.
I want someone to tell me how to setup inpa/ediabas to connect to icoma2.

[Bimmeristi]

Hi Bmwf01,please to know how to use nfs?

I use only winkfp to do flashing by Enterzb then add 17 vin then click done then click the program button. then wait for it to finish with programming OK.

I have never use NFS before.
I want someone to tell me how to setup inpa/ediabas to connect to icoma2.

Start iTool radar and wait till ICOM will appear with proper IP address (write this address in EDBIAS.INI), then click on it and click RESERVE.


change Port=6801 to ediabas.ini also.

[slaw1971]

Hi Bmwf01,please to know how to use nfs?

https://www.youtube.com/watch?v=8okJjyLabpo