[mojsterb]

Hello all,

i need help with adding key on Renault Clio II with Clip diagnostic.
Anyone can give some guidance?

Regards

[volavka]

Hello all,

i need help with adding key on Renault Clio II with Clip diagnostic.
Anyone can give some guidance?

Regards

first need pin code from uch . then learning key by Clip

[mojsterb]

Can i get ISK code with Clip? And then extract to PIN.
For Clio 2 is old graphic interface of Clip, does it support key adding function? Do you know which menu?

Thanks for helping.

[alfabit]

Yes, you can get ISK code, go to command UCH : " Reserve ( Spare ) " , code 5938, Clip displays ISK ( chars 18 - 23 ) code from the string, and that`s all, PIN extractor helps you further.

[mojsterb]

For Clio is this type of menu: https://www.youtube.com/watch?v=C5Sl0HhEG0Q
Does this also support reading ISK code? Which menu?
And also i want to know which menu for key adding.

[alfabit]

Show us what Clip is displaying on your car diagnose, there are lots of Clios with many different ecus. We need to see the ecus detected by Clip on YOUR car, not on cars by the net...
If you have the car show us, not keep for yourself, if you don`t have the car the discussion is over ...
We don`t like theoretical exercises, you know what i mean...

[mojsterb]

I was looking for functions in Clip, but my diagnostic probe went down at connecting to this Clio Campus 2007 1.5 dCi. So I must repair CAN Clip, or get new. (it only recognize CAN driver)

Now i get PIN from UCH dump.

[mar.wo]

Https://www.youtube.com/watch?v=noJFvlJvLRY here U have all about Ur problem, good luck

[mojsterb]

Now I have PIN and not working Clip, so project paused.

But I have problem with remote programming. This procedure doesn't work for me:

Code:

1. Turn Ignition OFF.
2. Press the central door locking button for more than 5 seconds. Note: the door should lock then unlock.
3. When this happens, 10 seconds is allowed and the immobiliser warning light illuminates.
4. Press the remote control once, the doors should lock and unlock.

I pressed central locking button for 5 sec, but nothing happens. Any help? Maybe is problem that is missing driver side locking actuator?

Https://www.youtube.com/watch?v=noJFvlJvLRY here U have all about Ur problem, good luck

This is for newer models, for old models is old graphic interface of Clip software and I don't know if have same functions.

[alfabit]

...
But I have problem with remote programming. This procedure doesn't work for me...
...

Of course it doesn`t work, this procedure is for old Clios ( ph 1 ), your Clio2 needs other procedure, newer than that. You should see the procedure described in Dialogys ( Renault repair manual )
But Clip software is very explicit, you should come by wiyh it, follow the indications for reprogramming keys.
Reprogramming keys will do the job also for engine coding and central locking doors the same time, you can`t reprogramm engine without doors locking or vice versa !