Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW MGU21 Emmc Writing Problem (Request)
01-06-2024, 21:47 PM,
(This post was last modified: 03-06-2024, 00:51 AM by donjuan020.)
Post: #1
|
|||
|
|||
BMW MGU21 Emmc Writing Problem (Request)
I detected MGU21 emmc pinouts with a multimeter. Now I can communicate and read. 128GB Toshiba Emmc available on it. But in the write function, the emmc write process does not start. Anyone have any ideas about the problem?I use UFI for these operations.
UFI ERROR CODE Loading file: "\\F:\MGU%20EMMC\MGU21\mmcblk0p7patch.img", size: 2.10 GiB... Writing mmcblk0p7 at 0x35600000-0xBBBFFFFF (4403200 sectors)... Failed to write block 0x35680000:65536 (return code: 0, CMD Error: ) cmd response: 0x0, card status: 0x0, card state: 0 (Card is in unknown state) OS error code: 0x00000102(Standby processing time exceeded) EMMC Health Test: Init bus... VCC: 3.3 V, VCCQ: 1.8 V Bus: 1 bit (SDR 4MHz) Access mode: sector mode Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V) Card/BGA: BGA (Discrete embedded) - High density MMC Manufacturer ID: 0x11 (Toshiba) Product name: 128G04 (0x313238473034), rev: 0x04, serial number: 0x34E2341E Manufacturing date: Ara 2020 CID: 11010031 32384730 340434E2 341EC77E CSD: D02F0032 8F5903FF FFFFFFEF 8A4000B6 Firmware version: 0x2 EXT_CSD revision: 1.8 (MMC v5.1) Partition info: Boot1: 31.88 MiB Boot2: 31.88 MiB RPMB: 4 MiB User area: 116.48 GiB(125,074,145,280 bytes) eMMC 5.x Health report: Device lifetime: Normal Estimation of the device lifetime (SLC): 0% - 10% device life time used Estimation of the device lifetime (MLC): 0% - 10% device life time used BMW_MB REMOTE CODING. FBS4 RENEW CRD3,MED17,EDC17
MGU KAFAS4 RENEW. 7DCT300 EGS ISN RESET F Series Remote EGS ISN Reset G Series Remote 8HP50 ISN Reset NBTEVO Regional Change FSC MERCEDES OFFLINE ALL UNIT CODING. AMG MENU ACTIVATION. Mercedes Anti Theft Code. |
|||
02-06-2024, 22:43 PM,
Post: #2
|
|||
|
|||
RE: MGU21 Emmc Writing Problem
I just read and wrote about MGU18. No problem. However, this MGU21 can read, but I get an error while writing. Anyone have any ideas? Lastly, I will try to write by removing emmc.
BMW_MB REMOTE CODING. FBS4 RENEW CRD3,MED17,EDC17
MGU KAFAS4 RENEW. 7DCT300 EGS ISN RESET F Series Remote EGS ISN Reset G Series Remote 8HP50 ISN Reset NBTEVO Regional Change FSC MERCEDES OFFLINE ALL UNIT CODING. AMG MENU ACTIVATION. Mercedes Anti Theft Code. |
|||
03-06-2024, 07:36 AM,
Post: #3
|
|||
|
|||
RE: BMW MGU21 Emmc Writing Problem (Request)
you will succeed with removing EMMC, also, small hint, kilometer long cables will not work with your setup.
MGU(ID7, ID8) Patching/Virginizing.
Feature Installer codes. KAFAS4 Virginizing. Physical head unit Repairs. CarPlay activations(EVO,ENAV2,MGU). Remote BMW Coding. [email protected] |
|||
03-06-2024, 12:35 PM,
Post: #4
|
|||
|
|||
RE: MGU21 Emmc Writing Problem
(02-06-2024, 22:43 PM)donjuan020 Wrote: I just read and wrote about MGU18. No problem. However, this MGU21 can read, but I get an error while writing. Anyone have any ideas? Lastly, I will try to write by removing emmc. your inbox is full, delete some messages Don't ask for FREE FILES
Most tuning fies tested on Dyno by myself Tuning - DPF Off - EGR Off - or any etc Certificated WinOLS Trainer |
|||
03-06-2024, 20:59 PM,
Post: #5
|
|||
|
|||
RE: BMW MGU21 Emmc Writing Problem (Request)
(03-06-2024, 07:36 AM)RuleNormaliai Wrote: you will succeed with removing EMMC, also, small hint, kilometer long cables will not work with your setup. I can easily make MGU18 with this system, the cables are short. But I can write parts 5 and 6 on MGU21, partitions 7 and 8 always give errors. I use 1bit and clock 4 for processing. BMW_MB REMOTE CODING. FBS4 RENEW CRD3,MED17,EDC17
MGU KAFAS4 RENEW. 7DCT300 EGS ISN RESET F Series Remote EGS ISN Reset G Series Remote 8HP50 ISN Reset NBTEVO Regional Change FSC MERCEDES OFFLINE ALL UNIT CODING. AMG MENU ACTIVATION. Mercedes Anti Theft Code. |
|||
04-06-2024, 06:33 AM,
Post: #6
|
|||
|
|||
RE: BMW MGU21 Emmc Writing Problem (Request)
MGU21(ID8) is only done by removing emmc.
MGU(ID7, ID8) Patching/Virginizing.
Feature Installer codes. KAFAS4 Virginizing. Physical head unit Repairs. CarPlay activations(EVO,ENAV2,MGU). Remote BMW Coding. [email protected] |
|||
04-06-2024, 14:31 PM,
Post: #7
|
|||
|
|||
RE: BMW MGU21 Emmc Writing Problem (Request)
Not true - at least not in my experience - yes the toshiba emmc is more difficult to get working perfectly but it is possible and works well when you have the "right formula".
Email: [email protected] Skype: [email protected]
HU Engineering Tool MGU Engineering Tool - now with field update mode via Feature Installer. Coding 2.0 |
|||
04-06-2024, 15:01 PM,
Post: #8
|
|||
|
|||
RE: BMW MGU21 Emmc Writing Problem (Request)
so without the "right formula" which you are the only one to have, it is only done by removing EMMC.
MGU(ID7, ID8) Patching/Virginizing.
Feature Installer codes. KAFAS4 Virginizing. Physical head unit Repairs. CarPlay activations(EVO,ENAV2,MGU). Remote BMW Coding. [email protected] |
|||
04-06-2024, 17:48 PM,
Post: #9
|
|||
|
|||
RE: BMW MGU21 Emmc Writing Problem (Request)
no - Medusa Pro II plus resistors and the appropriate length wire works - just takes a little trial and error to get right.
Email: [email protected] Skype: [email protected]
HU Engineering Tool MGU Engineering Tool - now with field update mode via Feature Installer. Coding 2.0 |
|||
04-06-2024, 22:53 PM,
Post: #10
|
|||
|
|||
RE: BMW MGU21 Emmc Writing Problem (Request)
even with cheap UFI it is possible without removing EMMC.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content