Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Autohex II
20-10-2017, 13:20 PM,
Post: #231
|
|||
|
|||
RE: Autohex II Technical Support & Feedback
And again, to update DME you dont need AH. It is easier, but not mandatory. And of course every seller will try to sell you stuff-they make their living by selling stuff
|
|||
22-10-2017, 13:46 PM,
Post: #232
|
|||
|
|||
RE: Autohex II Technical Support & Feedback
@Henos
ISN for MSV80 will require Update only if it is in programming mode, or the flash is faulty. You cannot get ISN from this DME unless it is in normal mode so Autohex will be able to retrieve the current flash version to return everything back as it was before. In F series, Autohex II requires sometimes to update the Ecu to another version (latest) hopping to get it by OBD rather than by boot mode. In your case (MSV80), You could flash the DME with any tool if you don't have the programming version, then you can try with Autohex again. Please don't blame the tool if you don't have the required feature and you don't want to switch the DME to the normal mode by programming it. |
|||
22-10-2017, 15:48 PM,
Post: #233
|
|||
|
|||
RE: Autohex II Technical Support & Feedback
What do you mean by programming mode ?
sorry for the stupid question. |
|||
22-10-2017, 18:00 PM,
Post: #234
|
|||
|
|||
RE: Autohex II Technical Support & Feedback
In any Ecu, there is a boot program. It has different jobs, one of them is to flash the main program flash.
When flashing starts, the Ecu will move to boot program (programming mode) and it will start getting flash data from diagnostic tool and write it to the flash. If flashing complete AND if flash checksum was correct, the boot program will switch back to the normal mode (main program ) and the Ecu will be normal. If something wrong went while programming or checksum is not correct, the Ecu will remain in programming mode. |
|||
Reputation: +2 - volavka [+2] | |||
31-10-2017, 16:15 PM,
Post: #235
|
|||
|
|||
RE: Autohex II Technical Support & Feedback
FYI, off current subject but thought I share if not known -
G series requires 3 pushes of start button to keep ignition on! |
|||
14-11-2017, 09:58 AM,
Post: #236
|
|||
|
|||
RE: Autohex II Technical Support & Feedback
(22-10-2017, 18:00 PM)MTKAutoHex Wrote: In any Ecu, there is a boot program. It has different jobs, one of them is to flash the main program flash. Can you check your mails? |
|||
14-11-2017, 10:31 AM,
Post: #237
|
|||
|
|||
RE: Autohex II Technical Support & Feedback
New video made by AH team
BMW FEM / BDC Key programming by Autohex II BEST CHIPTUNING SERVICE BY Zenter Performance
Contact Skype: zenter-88 Facebook: https://www.facebook.com/ZenterPerformance -------------------------------------------------------------------------------------------------------------- highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/ POWER BY TECHNOLOGY -------------------------------------------------------------------------------------------------------------- BEST CHIPTUNING SERVICE BY Jurebv Contact Skype: live:jure.coric_1 https://files.tuning-makarska.com/ -------------------------------------------------------------------------------------------------------------- - IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software WHAT'S NEWS ! -Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG -Citroen DS5 Steering lock Renew/Write Code by dumps -Passat CCM Repair corrupted dump succes -VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED ! -IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X -Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS -=[Full WinOLS/ECM Titanium User] =- Remember! dirty hands are a sign of clean money шшш.αήkαbôôτ.Ćô.цk |
|||
20-12-2017, 13:02 PM,
Post: #238
|
|||
|
|||
RE: Autohex II Technical Support & Feedback
AUTOHEX BMW Version 1.0.47
A new enhanced software version is available for all BMW Autohex users which rectified all issues regarding FEM/BDC unlock and more stabilized for programming ECU using E-net. Unlike the old versions getting secret file from FEM/BDC can be done all on bench. No need to go for advanced option for unlocking. software has become 100% safer and stable for programming FEM - GW and FEM - BODY on bench without any working key. Also Ethernet allows users to flash units like HU-H,KOMBI..etc in F series in reduced time period without any error. |
|||
20-12-2017, 18:55 PM,
Post: #239
|
|||
|
|||
RE: Autohex II Technical Support & Feedback
(20-12-2017, 13:02 PM)MTKAutoHex Wrote: AUTOHEX BMW Version 1.0.47 Already tested and work 100%. did 2 fem and all working and perfect. keep up the good work. was always doing the update from the car and had to travel to client, now client can just post fem and ecu and i can spend more time in my workshop. Thanks |
|||
24-12-2017, 00:43 AM,
Post: #240
|
|||
|
|||
RE: Autohex II Technical Support & Feedback
(22-10-2017, 13:46 PM)MTKAutoHex Wrote: @HenosWhait, does it mean that we loose all data if ECU was tuned right? Or is there some way in AH to restore this tuned flash data backup back to ECU? Išsiųsta naudojantis SM-G950F Tapatalk 4 Lt |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Autohex-unlocking Fem problem | tonemoz | 22 | 1,574 |
17-06-2023, 22:17 PM Last Post: jaramillo |
|
BMW BDC replacement with Autohex | RaoulK1998 | 3 | 375 |
28-02-2023, 08:17 AM Last Post: laquangksxd |
|
ISTA with AutoHex II head? | RaoulK1998 | 0 | 227 |
14-02-2023, 13:01 PM Last Post: RaoulK1998 |
|
Bmw AutoHex Full Package Vs Bmw Explorer Full | psya | 30 | 8,828 |
12-05-2019, 15:01 PM Last Post: Jumper |
|
BMW Explorer or AutoHex need | diag06 | 19 | 9,125 |
29-09-2016, 16:40 PM Last Post: MTKAutoHex |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content