Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Autohex II
20-10-2017, 13:20 PM,
Post: #231
RE: Autohex II Technical Support & Feedback
And again, to update DME you dont need AH. It is easier, but not mandatory. And of course every seller will try to sell you stuff-they make their living by selling stuff wink2
Quote this message in a reply
[+] 4 users say Thank You to bawareca for this post
22-10-2017, 13:46 PM,
Post: #232
RE: Autohex II Technical Support & Feedback
@Henos
ISN for MSV80 will require Update only if it is in programming mode, or the flash is faulty. You cannot get ISN from this DME unless it is in normal mode so Autohex will be able to retrieve the current flash version to return everything back as it was before.
In F series, Autohex II requires sometimes to update the Ecu to another version (latest) hopping to get it by OBD rather than by boot mode.
In your case (MSV80), You could flash the DME with any tool if you don't have the programming version, then you can try with Autohex again.

Please don't blame the tool if you don't have the required feature and you don't want to switch the DME to the normal mode by programming it.
Visit this user's website
Quote this message in a reply
22-10-2017, 15:48 PM,
Post: #233
RE: Autohex II Technical Support & Feedback
What do you mean by programming mode ?
sorry for the stupid question.
Quote this message in a reply
[+] 2 users say Thank You to koziol for this post
22-10-2017, 18:00 PM,
Post: #234
RE: Autohex II Technical Support & Feedback
In any Ecu, there is a boot program. It has different jobs, one of them is to flash the main program flash.
When flashing starts, the Ecu will move to boot program (programming mode) and it will start getting flash data from diagnostic tool and write it to the flash.
If flashing complete AND if flash checksum was correct, the boot program will switch back to the normal mode (main program ) and the Ecu will be normal.
If something wrong went while programming or checksum is not correct, the Ecu will remain in programming mode.
Reputation: +2 - volavka [+2]
Visit this user's website
Quote this message in a reply
[+] 12 users say Thank You to MTKAutoHex for this post
31-10-2017, 16:15 PM,
Post: #235
RE: Autohex II Technical Support & Feedback
FYI, off current subject but thought I share if not known -

G series requires 3 pushes of start button to keep ignition on!
Quote this message in a reply
[+] 6 users say Thank You to bryosb for this post
14-11-2017, 09:58 AM,
Post: #236
RE: Autohex II Technical Support & Feedback
(22-10-2017, 18:00 PM)MTKAutoHex Wrote:  In any Ecu, there is a boot program. It has different jobs, one of them is to flash the main program flash.
When flashing starts, the Ecu will move to boot program (programming mode) and it will start getting flash data from diagnostic tool and write it to the flash.
If flashing complete AND if flash checksum was correct, the boot program will switch back to the normal mode (main program ) and the Ecu will be normal.
If something wrong went while programming or checksum is not correct, the Ecu will remain in programming mode.

Can you check your mails?
Quote this message in a reply
14-11-2017, 10:31 AM,
Post: #237
RE: Autohex II Technical Support & Feedback
New video made by AH team
BMW FEM / BDC Key programming by Autohex II


BEST CHIPTUNING SERVICE BY Zenter Performance  [Image: congrats.gif]

Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
--------------------------------------------------------------------------------------------------------------

highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/
POWER BY TECHNOLOGY drive

--------------------------------------------------------------------------------------------------------------
BEST CHIPTUNING SERVICE BY Jurebv   [Image: yes.gif]
Contact Skype: live:jure.coric_1
https://files.tuning-makarska.com/
--------------------------------------------------------------------------------------------------------------
-
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   
In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS


-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty hands  are a sign of clean money 

шшш.αήkαbôôτ.Ćô.цk
Visit this user's website
Quote this message in a reply
[+] 10 users say Thank You to volavka for this post
20-12-2017, 13:02 PM,
Post: #238
XZBMW  RE: Autohex II Technical Support & Feedback
AUTOHEX BMW Version 1.0.47
A new enhanced software version is available for all BMW Autohex users which rectified all issues regarding FEM/BDC unlock and more stabilized for programming ECU using E-net. Unlike the old versions getting secret file from FEM/BDC can be done all on bench. No need to go for advanced option for unlocking. software has become 100% safer and stable for programming FEM - GW and FEM - BODY on bench without any working key. Also Ethernet allows users to flash units like HU-H,KOMBI..etc in F series in reduced time period without any error.

[Image: 2i972if.png]
Visit this user's website
Quote this message in a reply
[+] 4 users say Thank You to MTKAutoHex for this post
20-12-2017, 18:55 PM,
Post: #239
RE: Autohex II Technical Support & Feedback
(20-12-2017, 13:02 PM)MTKAutoHex Wrote:  AUTOHEX BMW Version 1.0.47
A new enhanced software version is available for all BMW Autohex users which rectified all issues regarding FEM/BDC unlock and more stabilized for programming ECU using E-net. Unlike the old versions getting secret file from FEM/BDC can be done all on bench. No need to go for advanced option for unlocking. software has become 100% safer and stable for programming FEM - GW and FEM - BODY on bench without any working key. Also Ethernet allows users to flash units like HU-H,KOMBI..etc in F series in reduced time period without any error.

[Image: 2i972if.png]

Already tested and work 100%. did 2 fem and all working and perfect.
keep up the good work.
was always doing the update from the car and had to travel to client, now client can just post fem and ecu and i can spend more time in my workshop.
Thanks
Quote this message in a reply
[+] 6 users say Thank You to bara001 for this post
24-12-2017, 00:43 AM,
Post: #240
RE: Autohex II Technical Support & Feedback
(22-10-2017, 13:46 PM)MTKAutoHex Wrote:  @Henos

In F series, Autohex II requires sometimes to update the Ecu to another version (latest) hopping to get it by OBD rather than by boot mode.
Whait, does it mean that we loose all data if ECU was tuned right? Or is there some way in AH to restore this tuned flash data backup back to ECU?



Išsiųsta naudojantis SM-G950F Tapatalk 4 Lt
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Autohex-unlocking Fem problem tonemoz 22 1,460 17-06-2023, 22:17 PM
Last Post: jaramillo
  BMW BDC replacement with Autohex RaoulK1998 3 353 28-02-2023, 08:17 AM
Last Post: laquangksxd
  ISTA with AutoHex II head? RaoulK1998 0 210 14-02-2023, 13:01 PM
Last Post: RaoulK1998
XZBMW Bmw AutoHex Full Package Vs Bmw Explorer Full psya 30 8,670 12-05-2019, 15:01 PM
Last Post: Jumper
  BMW Explorer or AutoHex need diag06 19 9,036 29-09-2016, 16:40 PM
Last Post: MTKAutoHex

Forum Jump:


Users browsing this thread:
3 Guest(s)

Return to TopReturn to Content