Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. AutoHex II



Post Reply 
Autohex II Technical Support & Feedback
14-11-2017, 10:31 AM
Post: #241
RE: Autohex II Technical Support & Feedback
New video made by AH team
BMW FEM / BDC Key programming by Autohex II




DO NOT Send me Private Message asking for help ,i will just ignore you
The forum is here for this reason
gavel
Visit this user's website Find all posts by this user
Quote this message in a reply
 Thanks given by: bara001 , bryosb , koziol , MTKAutoHex , thecash
20-12-2017, 13:02 PM
Post: #242
XZBMW RE: Autohex II Technical Support & Feedback
AUTOHEX BMW Version 1.0.47
A new enhanced software version is available for all BMW Autohex users which rectified all issues regarding FEM/BDC unlock and more stabilized for programming ECU using E-net. Unlike the old versions getting secret file from FEM/BDC can be done all on bench. No need to go for advanced option for unlocking. software has become 100% safer and stable for programming FEM - GW and FEM - BODY on bench without any working key. Also Ethernet allows users to flash units like HU-H,KOMBI..etc in F series in reduced time period without any error.

[Image: 2i972if.png]
Visit this user's website Find all posts by this user
Quote this message in a reply
 Thanks given by: bawareca , bara001
20-12-2017, 18:55 PM
Post: #243
RE: Autohex II Technical Support & Feedback
(20-12-2017 13:02 PM)MTKAutoHex Wrote:  AUTOHEX BMW Version 1.0.47
A new enhanced software version is available for all BMW Autohex users which rectified all issues regarding FEM/BDC unlock and more stabilized for programming ECU using E-net. Unlike the old versions getting secret file from FEM/BDC can be done all on bench. No need to go for advanced option for unlocking. software has become 100% safer and stable for programming FEM - GW and FEM - BODY on bench without any working key. Also Ethernet allows users to flash units like HU-H,KOMBI..etc in F series in reduced time period without any error.

[Image: 2i972if.png]

Already tested and work 100%. did 2 fem and all working and perfect.
keep up the good work.
was always doing the update from the car and had to travel to client, now client can just post fem and ecu and i can spend more time in my workshop.
Thanks
Find all posts by this user
Quote this message in a reply
 Thanks given by: MTKAutoHex , bawareca , bryosb
24-12-2017, 00:43 AM
Post: #244
RE: Autohex II Technical Support & Feedback
(22-10-2017 13:46 PM)MTKAutoHex Wrote:  @Henos

In F series, Autohex II requires sometimes to update the Ecu to another version (latest) hopping to get it by OBD rather than by boot mode.
Whait, does it mean that we loose all data if ECU was tuned right? Or is there some way in AH to restore this tuned flash data backup back to ECU?



Išsiųsta naudojantis SM-G950F Tapatalk 4 Lt
Find all posts by this user
Quote this message in a reply
26-01-2018, 19:05 PM
Post: #245
RE: Autohex II Technical Support & Feedback
New Autohex update released last week : 10.0.48
Now we can: change ISN in FEM/BDC
reset mileage
coding on G series ( I haven't tested yet)
I unlock 2 FEM/BDC without update.
I did EGS 8HP while making coffee
Doing BMW FEM/BDC for me has become easier making Vw or Audi all keys lost.
The safest tool for BMW ever for coding, programming, ISN,
Best support.

Please Autohex team find a way of making key via OBD.
Some client not happy the way we cut the DME to extract ISN

my temporary solution is i am using my own FEM and key just to power the car and pull ISN for DME via obd.

Thanks for the wonderful tool and keep up the good work
adoreadoreadoreadoreadoreadoreadore
Find all posts by this user
Quote this message in a reply
 Thanks given by: MTKAutoHex
12-03-2018, 21:25 PM
Post: #246
RE: Autohex II Technical Support & Feedback
AutoHex II BMW Diagnostic Software Version 1.0.49

Autohex II BMW Diagnostic software update is available for Autohex BMW users.

Fixed problems in ENET protocol when the Ecu has a big flash Data like HU_NBT.
Enhanced Programming when using ENET protocol.
Enhanced the procedure of FEM/BDC unlock.

bikerdriveenjoy
Find all posts by this user
Quote this message in a reply
 Thanks given by: bryosb , solidss
15-03-2018, 14:35 PM
Post: #247
RE: Autohex II Technical Support & Feedback
Attention Locksmiths
----------------------------------------------------------

There is one new package available for AUTOHEX II one of the reliable and safest BMW tool on the market.The new package is called Locksmith Lite which has some advanced functions in cheapest prices comparing to all competitors in the world.you need to spend just 2350 USD to do read ISN from ECU ,Key Programming For E and F series (CAS1, CAS2, CAS3, CAS3+, CAS4 ,CAS4+, FEM, BDC),even with this package you can unlock FEM/BDC so you can read/write ISN,VIN and reset mileage on those ecu's.
For more details you can check the below link or feel free to contact us direct.

https://www.microtronik.com/order-online...w4-ahx0103
Visit this user's website Find all posts by this user
Quote this message in a reply
 Thanks given by: Deimis
25-03-2018, 15:37 PM
Post: #248
RE: Autohex II Technical Support & Feedback
rne mislead people!)))
why do not you specify with which sffl this device can subtract isn from the dme blocks of the f-series!
Find all posts by this user
Quote this message in a reply
11-04-2018, 14:09 PM
Post: #249
RE: Autohex II Technical Support & Feedback
AutoHex II BMW Diagnostic Software Version 1.0.50
---------------------------------------------------------------------------
A new update is available for Autohex II BMW software from today which added two more latest DME's( MEV1723 and EDC17C76) to the wide list of ECU's in autohex.These two highly secured ECU's are used in some latest model's of BMW's and MINI .Using our ISN Boot mode software it's possible to
Read/Write both ISN and VIN,reset working hours from DME which is not at all available in the market.
Another major improvement from this update is its possible to update FEM and BDC without using Indiv programming.It makes the unlock procedure more easy for all users.The function is available in the Advanced page of On bench unlock.This page also consist of some functions for backup and restore FEM/BDC data to be used under the guidance of tech team in case of some Error.
Please watch the attached video for DME MEVD17.2.3 using AUTOHEX II.

https://www.youtube.com/channel/UCRHUqQw...YukknvLHwg
Reputation: +1 - thecash [+1]
Visit this user's website Find all posts by this user
Quote this message in a reply
 Thanks given by: volavka , bryosb , solidss , hulahans , simonchs , thecash
Post Reply 


Bookmarks

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
XZBMW ISTA-P 3.60 error 94201 63014 technical service initialization failed in pweber84 22 4,917 07-03-2018 12:38 PM
Last Post: donjuan020
  Technical Campaign 10011450400 in BaggieMatt 4 384 06-03-2018 16:08 PM
Last Post: inspi1981
XZBMW NEED REMOTE SUPPORT CODING HEAPLAMP MODULE in chong5195 3 404 28-01-2018 10:46 AM
Last Post: lynxbmw
  Looking for N57Z engine technical documents in Fx82 1 397 10-09-2017 18:36 PM
Last Post: myfirst1er
  Nbt evo support mkv movies ? in amigo74 2 455 28-05-2017 10:54 AM
Last Post: jonny81
XZBMW Wiinkfpt Technical terms Explaination in BMWF01 1 476 11-02-2017 13:44 PM
Last Post: Enabled
  Latest pszdata without ´trusted vin´ and id5 support ? in amigo74 0 565 09-12-2016 08:13 AM
Last Post: amigo74
  BMW Explorer or AutoHex need in diag06 19 4,134 29-09-2016 16:40 PM
Last Post: MTKAutoHex
XZBMW BMW technical campaign in r12tuning 0 537 06-06-2016 22:44 PM
Last Post: r12tuning
XZBMW BMW INPA 5.06 with F-Series Support in Bimmer 41 40,371 28-10-2015 15:15 PM
Last Post: NeRkO20

Forum Jump:


User(s) browsing this thread:
1 Guest(s)

Return to TopReturn to Content