Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Kess v213 connections Q pleas help out
28-08-2015, 16:14 PM,
Post: #1
MDaewoo  Kess v213 connections Q pleas help out
Hi all
Got my new kess and ktag home and trying to use it for first time but
is it the meaning to use the blu 12v cabel and plug it in kess v213 obd connetor and provide it with pure 12v when kess asking for this ? Or just read by normal obd connection
car is mercedes 320 cdi edc16c2 2003 w211
cep geting wake uperrors trying to read this car.

Thanks in advance
Quote this message in a reply
28-08-2015, 16:22 PM,
Post: #2
ZVW  RE: Kess v213 connections Q pleas help out
Hi dont worry about blue cable.

Make sure car is connected to battery charger / Support unit and volts are stable 13.5 volts +

All should be ok

[Image: OxNUyuy.jpg]All VAG immo off or transfer - change Power Class up to & including WFS6 SHE -VAG DCM 6.2 3.7 - immo off also Bcm2, Elv, TC DSG DL381 DQ200 DQ250 DQ400 DQ500: Here:
AKL MQB - + A6-A7-A8-Touareg- generate sync key file - Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need.
Quote this message in a reply
28-08-2015, 16:56 PM,
Post: #3
RE: Kess v213 connections Q pleas help out
Thanks i will tri with carharger on. But is thats why i have got the wake up error becours volt on kess was only 12.2 v all time i did id what about the pull its that only default or shurt i use one of the chose s ohm and just amax read speed or min. Thanks
Quote this message in a reply
28-08-2015, 17:59 PM,
Post: #4
RE: Kess v213 connections Q pleas help out
You need rework your pcb
Quote this message in a reply
[+] 4 users say Thank You to betrescudan for this post
30-08-2015, 14:45 PM,
Post: #5
RE: Kess v213 connections Q pleas help out
Hi
i just tried 10 times agian and still got this wake up error.

When i choose in kess v213 046 menu mercedes E211w 2003 and it says EDC16C2 and there i cep getting errors
now i was told that they have EDC15 as like the old and last model of w210 engines is that's why i cant read it out the ecu?
I tried picking the.old models.but then i get ecu unknown .
This time i have a charger on and it showed 13.22 to 13.52 v and didn't came under 13.08v
i tryed the kees and it did recover a lock e46 330d for me so i think i have instaled the program as it should.
Thanks in advance
mads
Quote this message in a reply
30-08-2015, 15:10 PM,
Post: #6
RE: Kess v213 connections Q pleas help out
fail you need rework of pcb...
Quote this message in a reply
30-08-2015, 15:58 PM,
Post: #7
RE: Kess v213 connections Q pleas help out
Hi
mr betrecusdan
Didn't saw your answer befor nlw my mobil hav update last i read the post.
I just got this new one band its a 87-c and my ktag is SE80-c. And i dont n know if i installed program right. But i just followed the vidoe i found and instal v213 and copied HELP folder på v213. So hope thats the right way on a new clean xp. Ibm pc.
I have only tried it on bmw 330d and this mercedes 2003 w211 cars and only the bmw was done successfully

what rework needs done to pcb bord. Do to you have a solution for this.

With this kess i have here. Its sholud be ultimate token but is meaing i have to make new toke to SD card in kess with new token ? Just that there was a folder on cd with token instructions.
Quote this message in a reply
30-08-2015, 20:05 PM,
Post: #8
RE: Kess v213 connections Q pleas help out
Pff...
before all..
if your kess is fw 3.099...need to use sw.2.06
if your kess is fw 4.036...need to use sw 2.08...not 2.13 shi+
about tokens...i am really curiouses if you will reset your tool
Quote this message in a reply
31-08-2015, 09:57 AM, (This post was last modified: 31-08-2015, 10:53 AM by bmw_mads.)
Post: #9
RE: Kess v213 connections Q pleas help out
Okay about token and reset i quite dont understad what you meant.
On i have the 87-c so thats 4036 but on the cd that came along with kess there is 2.10 2.11 2.12 and soft for token. I did write to copani but got answer back. Yours is on limited token so dont worry freind. I actually either dont understand if the free token only come with 2.13 or its the help folder that's free token.

Sw 2.08 is that a nother ksuite program or is it soft for main bord? Can i install the 2.08 my self? Or need to send back kess to get it done?
Thanks for helping out mr

hi Again

new Q wink
got this back as a answer to edc16. so its the meaining to use the littel Black box that came with the kess and the OBD connector in end of box and connect to obd in car ! i have not use this box before as it wasnt mentions in kess or in setup. there is only the blue wire the says sholud be used but not when to used it and kess soft do not tell to use it or connect 12v to enny wirring at all under the process.


Q: Customer told us that KESS V2 can not do EDC17 well, such as Bosch EDC 17 (cp04-CP14-CAN-Med17.X ) and Bosch Bosch EDC 17 C54( Passat, Golf, Crafter, Octavia, Yeti-VW). EDC16 all ok.

A: Yes, Kess V2 can not do EDC17 at present. It can do EDC16 well, but when you do it, you need to connect the Anti-mediation lock module to read and write data for vehicles. Becuase new style vihicles have new encrypted ways.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
KOpel Opel Vivaro 1.9 Dti Pleas Egr Off ciompa 1 58 08-03-2024, 00:51 AM
Last Post: Hazerssmurf
XZBMW Mev946 320i 150HP Orginal full ecu file for kess Mathijshee 6 415 03-03-2024, 00:48 AM
Last Post: Mathijshee
  Kess vr file jtdpow 1 115 29-02-2024, 17:29 PM
Last Post: loki954
  Need Kess original Virtual Read file vw SHARAN 2.0tdi EDC17c46 vision 1 128 31-01-2024, 22:51 PM
Last Post: Stig33
  Need Kess original Virtual Read file Audi A6 4G 3.0 TDI vision 1 163 05-01-2024, 17:36 PM
Last Post: AP Performance
  Pleas Help! DAMOS FILE For Ford Focus Tscheppo 0 116 21-11-2023, 17:47 PM
Last Post: Tscheppo
  SEARCHING : BMW EDC16C35 ORI DUMP SW 1037500775 KESS-OBD READ obdcloud 3 294 15-11-2023, 12:24 PM
Last Post: bboctavian
  Need Kess VR file jtdpow 0 312 03-11-2023, 09:30 AM
Last Post: jtdpow
  Ksuite 3.21 / Kess V2 5.045 CenturionM 4 1,731 02-10-2023, 14:05 PM
Last Post: CenturionM
  Bmw MSD82.1 very very stange fault after kess R/w Car not start.. sivyx 2 369 30-09-2023, 22:46 PM
Last Post: CenturionM

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content