[Santiago]

Hello guys! How anyone know to remove the silicone gel in hybrid ECU´s? I have some ECU´s with communication breakdown and I like to repair it. Thanks in advance!

[rs@chip]

I use a plastic knife and some alcohol or flux remover..you need a lot of time to do that and soldering that wires is dificul too..but you can make it.. good luck

[banoo]

This is aluminium wire-use Alusol,this is the one for good job

http://www.mektronics.acrobat.com.au/sol...s/0002.jpg

[Santiago]

This is aluminium wire-use Alusol,this is the one for good job

http://www.mektronics.acrobat.com.au/sol...s/0002.jpg

Thanks for your advice but I need a product to remove silicone gel in ECU´s.

[rs@chip]

You have to do it by your hands..you dont need to clean all ecu yust faulty part

[Marcos]

Thanks for your advice but I need a product to remove silicone gel in ECU´s.

1. Dichloromethane (Methylene chloride).
2. Toluene, methylbenzene, Toluol

[Santiago]

Thanks for your advice but I need a product to remove silicone gel in ECU´s.

1. Dichloromethane (Methylene chloride).
2. Toluene, methylbenzene, Toluol

Thanks Marcos, I will try with both products.