[Fraz]

Hi all,

Im thinking about buying this tool for doing all CAS modules does anyone have any experience?

Sorry for posting the link, please see the link in the attached file.

Thanks,
Fraz

----------------------------------------
EDIT By Moderator.
Hey Sir Spend Some Time For Read Rules !
Rule No3 : DO NOT POST Links on the Board! Links must be attached in a text file.
Rule No10: Advertising is not permitted

so next time Post Photo Or Smilar No any china link

Thanks For Your Attention (Y)

[energjia]

Hi all,

Im thinking about buying this tool for doing all CAS modules does anyone have any experience?
Thanks,
Fraz

even the original device from elprosys is not doing the BMW CAS4 （1L15Y－5M48H）

[Fraz]

Even the original device from elprosys is not doing the BMW CAS4 （1L15Y－5M48H）

So this is a clone of the Elprosys tool?

Apart from the 1L15Y - 5M48H is it ok to use this on CAS/2/3/3+/4?

[vaidisvaidis]

Even the original device from elprosys is not doing the BMW CAS4 （1L15Y－5M48H）

So this is a clone of the Elprosys tool?

Apart from the 1L15Y - 5M48H is it ok to use this on CAS/2/3/3+/4?

bmw exploer ru no problems

[Fraz]

Has anyone tried the AK300 there is a youtube video showing it can do the CAS/2/3 but the demonstration only shows the CAS2 being done.

Does anyone have any experience with it?

If not then il just have to go with the red CAS3.

[marto4476]

I bought AK300 months ago. On the first car goes smoke from it . I opened it and one of the biggest mcu inside the tool was burned .... The car was 2007 BMW E90. The interface has many options ( reading cas 2 by obd, bdm or can , milleage correction ... ) , but i cannot use it now

[Vlado ATM Chiptuning]

For cas modules i suggest only ori tools...

[BMW-Lovers]

Check this link for key learning of all BMW series (CAS1,CAS2,CAS3,CAS3+, CAS4)
http://www.micro-tronik.com/scan-tools-p...as2-cas3+/

[octav_kiss]

Smok j tag ist super and no expensive