Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ ISTA-D Programming Problem
19-10-2024, 13:59 PM,
(This post was last modified: 20-10-2024, 20:59 PM by al70.)
Post: #1
|
|||
|
|||
ISTA-D Programming Problem
Hello!
I have a Problem with my ISTA-D 4.49.23 Installation This is my Structure: ISTA 4.49.23 RegConfig files SQLiteDBs BLP_4.49.20 ExecutionBreak_4.49.20 ista_standalone_installer_4.49.23 ISTA_v4.49.23.28669 PSdZData 4.49.20 Full I have installed the Software with all Drivers like .NET and Java. Started the Software and the Diagnosis was successfull. Then i have copied the " PSdZData 4.49.20 Full " to the psdzdata Dir and replaced everything. Now i have started ISTA and the Diagnostic does not function. It was sticking in the GUI for the Chassis Number, Model Motortype etc. What is the issue? Do have anyone a Instruction to install the Software? Thank You Very Much for your help! Regards Exodoos |
|||
19-10-2024, 17:39 PM,
Post: #2
|
|||
|
|||
RE: ISTA-D Programming Problem
check regedit.exe, config is wrong. Use programming only with ICOM.
|
|||
19-10-2024, 23:58 PM,
Post: #3
|
|||
|
|||
RE: ISTA-D Programming Problem
Better capture a picture of the directory structure could help solve the problem. I think your put the full data in wrong directory. Basically full SDP data should be put under PSdZ/data_swi folder.
BMW 5 Series and Audi Q4 e-tron user.
If my post helps, please give thx and rep , thanks! |
|||
20-10-2024, 00:50 AM,
(This post was last modified: 21-10-2024, 05:11 AM by Wesk18.)
Post: #4
|
|||
|
|||
RE: ISTA-D Programming Problem
try this one, its already patched. you just need the psdz.
|