[tigre]

hi, i have here this x5 that have error in abs, error is about both rear speed sensor.

i check wires and diagram with ista and are ok, i detect that ABS module is not original from car.

its possible identify in this module the pins of rear sensor?

regards

car vin: LM23171

Module ref thar is on car : 0265950067

[Liteace]

Your Bosch part number:
0265950067 cross ref to bmw part number 34 51 6 756 217 or 34 52 6 761 980,

going by the vin it should be fitted with,

.bmw:  34 51 6 758 627
bosch: 0265225009 / 0265225010

V = FRONT
H = REAR


   

[Beard]

Hi.
There was a problem with ABS units in this body until 2004.
The only thing that will help is either repairing the unit or replacing the unit!!!

[tigre]

Hi.
There was a problem with ABS units in this body until 2004.
The only thing that will help is either repairing the unit or replacing the unit!!!

the solder points are all good inside the module

regards

[Beard]

If the wiring from the unit to the sensor is OK and the sensors are new, then only the ABS unit needs to be replaced.
New or working used. It will need to be coded in your car and the steering wheel sensor (zero position) will need to be remembered again.

[tigre]

thanks to all, is solved, with rewiring

regards