Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Carprog 6.8
10-09-2015, 15:21 PM,
Post: #1
|
|||
|
|||
Carprog 6.8
[attachment=17909]
Hello everyone,
I got this device which came with 6.8 software from the seller. It worked fine Before. I borrowed it to a friend just to get it not working any more. It not recognized neither in XP nor win7. The guy said he did a hardware test using the 4.74 software, . Now I think it might be a corrupted dump or may be not. Suspecting that I searched for the re_flash methods. Came across few solutions about that but the PCB layout and via/s are different from this one I have. I think those where for the 4.01 or 4.7 hardware. Here are some pictures of my PCB. Any help here would be greatly appreciated. Ah I forgot to mention that one of the differences is the pin 55 of atmel chip connection is not as those shown in the forum |
|||
12-09-2015, 18:07 PM,
Post: #2
|
|||
|
|||
RE: Carprog 6.8
Well seems no one came across this pcb!!
All I need to know is if its the same procedure to flash as of the other older pcb. Any help?? |
|||
12-09-2015, 20:43 PM,
Post: #3
|
|||
|
|||
RE: Carprog 6.8
Check the soldering on mini usb port and on at88 eeprom
|
|||
13-09-2015, 05:46 AM,
Post: #4
|
|||
|
|||
RE: Carprog 6.8
Hi,
nothin's wrong with em solder joints. To make sure I ran the iron on them pins. Same behavior |
|||
13-09-2015, 21:42 PM,
Post: #5
|
|||
|
|||
RE: Carprog 6.8
Did it with some trial and error. Device flashed with 4.74. Working and waiting for next time as timer kicks in.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content