[octav_kiss]

Hy all
I tried to solve with digiprog 4,82 audi a3 2005---2009
I had problems with a model audi a3.died dash.and i tried again and work 100%.

[m35i]

How solved the problem??

[bara001]

How solved the problem??

easy solution with dp3 on audi a3 2005-2009, i solve mine by choosing a3 2012 on dp3.

[m35i]

But what problem solved?? DEF.0???

[Rhyno92]

But what problem solved?? DEF.0???

Hi guys, my dash died after i read it with abrites.
i try this solution but dash won't revive.
How i can solve the problem?!

[jokerdiag]

Read eprom and micronas i can help you

[juanma04]

Hi 4 all members

today i post here how to repair dashboard Audi A3 With micronas inside and 24c32 dead with DIGIPROG3 and SUPERVAG CAN+K

here we go

Solution for dead dash need xprog programmer clone modified to 5.51

first need to read micronas connet wires like this



A3_buttom.jpg and A3_Top.jpg


select right micronas securised


read it and verifier if ok continue


go to Adress F7FE8 you can see all is FF FF .... DONT WORIE


JUST MAKE like this


FF FF FF FF FF FF FF FF 5E 00 00 EA AA AA 55 55


SEE picture



fichier repaired photo.JPG


write modified file and verifer


then your dash will be ok


finish


have nice day

Dear,

Can I remove the EEPROM and patch it with any EEPROM programmer tool and put it back to the board again?

Thanks in advance!

[33111]

Hello.
I have here an Audi TT dash from 2008 (MJ 2009) (8J0920930F). This one should replace my old dash (8P0920930G). With FVDI reading the old dash is no problem but the TT dash reading is not possible.
Is it possible to decrypt 24c32 eeprom from TT dash?
The information like CS, keys, config,...I have from the old dash so is it possible to write this information into eeprom from tt dash?
I have here both eeprom (93C86 from old dash and 24c32 from tt dash).

I tried it with carprog 9.86 (I have full dash package original) for Audi A3/TT/R8 2009-2011 but without succes only that milage is now zero km and keys+fin are clear but with def error in display

My tools: FVDI, Carprog, desolder station and revelprog for eeprom reading

What is possible?

Thanks in advance!

[rochinha75]

I have same problem, i try read two dash, and same problem.

i try dessolder eeprom, input in socket and try, same "Bypass Security Error"

all connection good same photo...

Has anyone managed to solve the problem?

[samoosa1]

Hi 4 all members

today i post here how to repair dashboard Audi A3 With micronas inside and 24c32 dead with DIGIPROG3 and SUPERVAG CAN+K

here we go

Solution for dead dash need xprog programmer clone modified to 5.51

first need to read micronas connet wires like this



A3_buttom.jpg and A3_Top.jpg


select right micronas securised


read it and verifier if ok continue


go to Adress F7FE8 you can see all is FF FF .... DONT WORIE


JUST MAKE like this


FF FF FF FF FF FF FF FF 5E 00 00 EA AA AA 55 55


SEE picture



fichier repaired photo.JPG


write modified file and verifer


then your dash will be ok


finish


have nice day

hie. i have done the connections as shown with xprog-m but it fails to read,what could be wrong?