+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: BMW E91 Professional HeadUnit Retrofit with Bluetooth/USB/AUX (/showthread.php?tid=46410)
Pages:
1
2
RE: BMW E91 Professional HeadUnit Retrofit with Bluetooth/USB/AUX - dumitru.o - 10-03-2019
(10-02-2019, 19:41 PM)m3nt4l Wrote: Good evening.
I have a 2010 BMW E91 NON iDrive registered in 04/10, originally installed was a professional HU without Bluetooth and USB but it has a CD Changer. There is no MULF in boot either.
I am looking at upgrading to Professional HU 07/10 with built in Bluetooth and USB function (It has the white port on the back). I have all the wires and microphone etc
I am a bit stuck with the coding side of it. I know I need to change the VO of the car.
Will I need to change the VIN on the HU? (If so a step by step guide would be great)
Are these the three VO's I will need to add: $663 $6NN $6FL?
Will the CD changer still work?
Anything else I may have missed?
Thanks
will be enough. cd changer will work if you professional HU has MOST port. i would suggest to change the build date in the VO when you code. choose something from 2011
RE: BMW E91 Professional HeadUnit Retrofit with Bluetooth/USB/AUX - david357 - 11-03-2019
From 09/2007 any E9x has a D-CAN OBD interface. With a standard OBD cable you will not be able to code Radio Professional in the car. An ICOM will do the job...