+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: CarProg All Questions/Answers Here! (/showthread.php?tid=12004)
RE: CarProg All Questions/Answers Here! - Enabled - 04-05-2017
Anybody know what the correct resistors and capacitors are for getting the transponder antenna to work?
I put 6.7nF capacitance (I put 2x 3.3nF capacitors in), and I get instead of "Antenna not found", I now get "Transponder signal too low". On an MK4 VW Bora key. So moving in the right direction, at least.
I put a 10kohm resistor instead of one 150kOhm resistor, and still the same. I experimented with other resistors, and still no luck.
Couldn't find a 15k ohm.. but the fixes (google search) are very variable anyways.
RE: CarProg All Questions/Answers Here! - dil6222 - 04-05-2017
(04-05-2017, 01:01 AM)Enabled Wrote: Anybody know what the correct resistors and capacitors are for getting the transponder antenna to work?
I put 6.7nF capacitance (I put 2x 3.3nF capacitors in), and I get instead of "Antenna not found", I now get "Transponder signal too low". On an MK4 VW Bora key. So moving in the right direction, at least.
I put a 10kohm resistor instead of one 150kOhm resistor, and still the same. I experimented with other resistors, and still no luck.
Couldn't find a 15k ohm.. but the fixes (google search) are very variable anyways.
Hello again try 100ohm not 100kohms not a fix I've done before so can't say whether it will work
RE: CarProg All Questions/Answers Here! - dodo34 - 07-05-2017
If i buy carprog 8.21 clone will it work with the newest 10.05 software ?
RE: CarProg All Questions/Answers Here! - domelec - 07-05-2017
All carprogs work with 10.05 software
problem you have is activations are not all active
you will only get activations for what serial/lib you have
RE: CarProg All Questions/Answers Here! - dodo34 - 07-05-2017
How to enter the serial and where ?
RE: CarProg All Questions/Answers Here! - domelec - 07-05-2017
You don't enter serial
The serial you see in bottom left corner of the software with carprog connected to pc
Need activation - osprog - 08-05-2017
59646-ddbbaa-f1006-ad54b
RE: CarProg All Questions/Answers Here! - domelec - 08-05-2017
(08-05-2017, 12:00 PM)osprog Wrote: 59646-ddbbaa-f1006-ad54b
hardware id error
SORRY - osprog - 08-05-2017
MY ID: 59646-D08AA-F1006-AD54B
RE: CarProg All Questions/Answers Here! - dewons - 09-05-2017
14116-D0823-9E006-AFA44
