DiagBox 8.01 Installation - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56) +---- Thread: DiagBox 8.01 Installation (/showthread.php?tid=13539) |
RE: DiagBox 8.01 Installation - Timon2210 - 28-06-2018 (27-06-2018, 20:01 PM)Simple Wrote: No, you are fine with respect to the version#. I changed the versioning method so that the user knows that he is using version 7 with version 8 updates and which update is installed. Hello again Simple, Thank you again very much for your help,well I downloaded the updated up to 8.55,and all went well,i have now the version (V7.855) thanx to you,thanx very much,I will test it on the car and report back if it solved the issue I told you about or not. RE: DiagBox 8.01 Installation - Citroën - 16-07-2018 Hello, Is this multi language? i'am Dutch RE: DiagBox 8.01 Installation - Simple - 16-07-2018 Please review this post: https://cartechnology.co.uk/showthread.php?tid=11087 RE: DiagBox 8.01 Installation - RuLe - 28-07-2018 hello, I have a problem, when I install version 8.0 and try to start lexia or pp2000, I get the error: data access problem, with version 7.52 I do not have this problem RE: DiagBox 8.01 Installation - BhdR - 30-07-2018 Hi. I made the Diagbox installation successfully. I updated to version 8.55. I get an error when closing after the last update. I have not found out what the problem is. On Vmware Fusion. Xp SP3 32 bit. .Net 3.5 SP1, VC++ 2008 Redistributable Package installed. RE: DiagBox 8.01 Installation - wbstr - 28-08-2018 hi AWRoot_v7_Conf+Ativation_v8.exe link error help me ! RE: DiagBox 8.01 Installation - Stefano G - 31-08-2018 (28-08-2018, 13:45 PM)wbstr Wrote: hi AWRoot_v7_Conf+Ativation_v8.exe link error help me ! Same for me... RE: DiagBox 8.01 Installation - Dorf - 07-09-2018 AWRoot_v7_Conf+Ativation_v8.exe link dead RE: DiagBox 8.01 Installation - Simple - 07-09-2018 First post updated and AWRoot_v7_Conf+Ativation_v8.exe link is working.. Good luck, Simple. RE: DiagBox 8.01 Installation - lvlacleod - 07-09-2018 I have the very latest version. 9.30 I think. Can you do anything with it Simple? |