+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Kess V2 V1.94 (/showthread.php?tid=1531)
Pages:
1
2
Kess V2 V1.94 - Bimmeristi - 09-01-2014
Download link for all forum members.
Don't share it or password to other forums!!
Not tested by me, so use your own risk!!!!!
Size over 200Mb in .rar
-Bimmeristi
EDIT: "Without current firmware 4020-4024 (LPC2478 Hex) this version does not help unfortunately ... The new protocols from v1.94 can not be used ... " Says one member.
EDIT2: "Nobody's got the current version lpc2478 hex
They all got china v1.89 hex
It's crp3 protected so its very very hard to get it out of micro
U need meds for it " Says another member.
----------------------------------- Is it true, i don't know! So be careful with this!!!!
------------Is it true, i don't know! So be careful with this!!!!
EDIT: Link updated!
RE: Kess V2 V1.94 - dob12 - 09-01-2014
Pass please
This archive is damaged
try download again
RE: Kess V2 V1.94 - Bimmeristi - 10-01-2014
(09-01-2014, 20:19 PM)dob12 Wrote: Pass please
This archive is damaged
try download again
Hi!
Its not damaged. You need to use v5 winrar. Try with this:
http://garage-automotive.com/showthread.php?tid=1291&highlight=winrar
Pass via PM.
-Bimmeristi
RE: Kess V2 V1.94 - sinan33 - 26-01-2014
Has anyone tried it?
Does it working with new drivers or do we need new sd card files to make it working fully?
RE: Kess V2 V1.94 - Chri1911 - 26-01-2014
(26-01-2014, 17:00 PM)sinan33 Wrote: Has anyone tried it?
Does it working with new drivers or do we need new sd card files to make it working fully?
You need new firmware (v1.94: 4020 - V2.00: 4022) for new protocols, not just the SD card or K-Suit alone
There is still a time until there lives an update ....
regards
Chri
RE: Kess V2 V1.94 - sinan33 - 26-01-2014
(26-01-2014, 17:15 PM)Chri1911 Wrote: You need new firmware (v1.94: 4020 - V2.00: 4022) for new protocols, not just the SD card or K-Suit alone
There is still a time until there lives an update ....
regards
Chri
So, it is useless for now?
RE: Kess V2 V1.94 - Chri1911 - 26-01-2014
(26-01-2014, 17:42 PM)sinan33 Wrote: So, it is useless for now?
That's right, I have been following and am working for a long time the updates of V1, 89 to V2.00.
You can use the V1.96 without any problems even with the clone, but the protocols are in the NXP LPC2478-(firmware hex dump) inside.
RE: Kess V2 V1.94 - vampirept - 29-01-2014
Hi
I have Kess v2 1.89, and wnat to update it to a new vrsion.
How do i write the new hex dump to MCU.
There is a way to do it with out a Universal Programmer ?
Many thanks
RE: Kess V2 V1.94 - vampirept - 30-01-2014
No One can answer my question ?
I have Kess v2 1.89, and wnat to update it to a new vrsion.
How do i write the new hex dump to MCU.
There is a way to do it with out a Universal Programmer ?
some one can help, Please.
RE: Kess V2 V1.94 - mexanico1971 - 07-02-2014
(30-01-2014, 09:51 AM)vampirept Wrote: No One can answer my question ?
I have Kess v2 1.89, and wnat to update it to a new vrsion.
How do i write the new hex dump to MCU.
There is a way to do it with out a Universal Programmer ?
some one can help, Please.
I"m not shore about what I going to say !
but I seems that new version have few cks than old version !
and the changes are only on soft !
for write the LPC you can use J-link or segger !
if any one can confirm please do it !
BR