[Bimmeristi]

Download link for all forum members.

Don't share it or password to other forums!!

Not tested by me, so use your own risk!!!!!

Size over 200Mb in .rar


-Bimmeristi

EDIT: "Without current firmware 4020-4024 (LPC2478 Hex) this version does not help unfortunately ... The new protocols from v1.94 can not be used ... " Says one member.

EDIT2: "Nobody's got the current version lpc2478 hex

They all got china v1.89 hex

It's crp3 protected so its very very hard to get it out of micro

U need meds for it " Says another member.



----------------------------------- Is it true, i don't know! So be careful with this!!!!


------------Is it true, i don't know! So be careful with this!!!!


EDIT: Link updated!

[dob12]

Pass please
This archive is damaged
try download again

[Bimmeristi]

Pass please
This archive is damaged
try download again

Hi!

Its not damaged. You need to use v5 winrar. Try with this:


http://garage-automotive.com/showthread....ght=winrar

Pass via PM.

-Bimmeristi

[sinan33]

Has anyone tried it?
Does it working with new drivers or do we need new sd card files to make it working fully?

[Chri1911]

Has anyone tried it?
Does it working with new drivers or do we need new sd card files to make it working fully?

You need new firmware (v1.94: 4020 - V2.00: 4022) for new protocols, not just the SD card or K-Suit alone
There is still a time until there lives an update ....

regards
Chri

[sinan33]

You need new firmware (v1.94: 4020 - V2.00: 4022) for new protocols, not just the SD card or K-Suit alone
There is still a time until there lives an update ....

regards
Chri

So, it is useless for now?

[Chri1911]

So, it is useless for now?

That's right, I have been following and am working for a long time the updates of V1, 89 to V2.00.
You can use the V1.96 without any problems even with the clone, but the protocols are in the NXP LPC2478-(firmware hex dump) inside.

[vampirept]

Hi

I have Kess v2 1.89, and wnat to update it to a new vrsion.

How do i write the new hex dump to MCU.
There is a way to do it with out a Universal Programmer ?




Many thanks

[vampirept]

No One can answer my question ?

I have Kess v2 1.89, and wnat to update it to a new vrsion.

How do i write the new hex dump to MCU.
There is a way to do it with out a Universal Programmer ?

some one can help, Please.

[mexanico1971]

No One can answer my question ?

I have Kess v2 1.89, and wnat to update it to a new vrsion.

How do i write the new hex dump to MCU.
There is a way to do it with out a Universal Programmer ?

some one can help, Please.

I"m not shore about what I going to say !
but I seems that new version have few cks than old version !
and the changes are only on soft !
for write the LPC you can use J-link or segger !
if any one can confirm please do it !

BR