+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Ista D vs ISTA P (/showthread.php?tid=16810)
Pages:
1
2
Ista D vs ISTA P - sollaris - 06-07-2016
Hello guys.
I have a bmw e46 1999.
I am trying to diagnose my car,but i failed untill now.
I installed ISTA-D....but it seems it doesnt read my ECU.
PErhaps it is not compatible with my car.
Will ISTA-P help?
Thank you all.
Have a nice day.
EDIT Post 06.07.2016
I downloaded both ista-d and ista-p from this post:
http://cartechnology.co.uk/showthread.php?tid=15589
I have use this tipps at instalation:
"""
Rheingold :
Unpack, for examle in D:\Rheingold, unpack and copy SQLiteDBs in Rheingold\SQLiteDBs\, run RCleanerV4.3.exe from Tools folder.
Apply ISTA-D Reg Fix for your system (x86 or x64) from Tools folder.
Run D:\Rheingold\TesterGUI\bin\Release\ISTAGUI.exe.
If ask license, enter it from License.txt file. Enter 1 in ISIS field, ignore error and press ok.
"""
What i did extra:
In Device manager...i changed the port to 9...latency 1..
In the Ediabas.ini....I opened with Notepad...and made some adjustments..as port..interface...etc.
I do not get any errors...but i get this screen:
![[Image: BHloieJ.jpg]](http://i.imgur.com/BHloieJ.jpg)
In the pas i used 1 month INPA 5.02....but it was in german..
The language destroyed my success with the diagnose program.
Can anybody help me out to set up ISTA-D please?
Thank you for your support.
RE: Ista D vs ISTA P - Bimmer540 - 06-07-2016
Which cable/cabels you use? Is this the first time you used Ista-d?
RE: Ista D vs ISTA P - Fx82 - 06-07-2016
You should use the odb plug under the hood.
RE: Ista D vs ISTA P - sollaris - 06-07-2016
(06-07-2016, 05:08 AM)snypertje Wrote: Which cable/cabels you use? Is this the first time you used Ista-d?
Hello buddy.
I use K-Dcan cable.
I found this forum 1 week ago....so Yes..this is my first time with ISTA-D.
Thank you for the reply.
(06-07-2016, 07:35 AM)Fx82 Wrote: You should use the odb plug under the hood.
Hello buddy.
My car has only the 20 pin connector under the hood.
Inside the car i have nothing.
(06-07-2016, 02:22 AM)lalaura Wrote: Ista D is for diagnosis
Ista P is for programming
For E series, you just need a K+DCAN usb cable
Ok mate..i understand.
Then if ISTA-D works for you guys...it should work for me also..
Just need a litle help with the settings.
RE: Ista D vs ISTA P - Bimmer540 - 06-07-2016
Wich K+Dcan you use and incl 20 pins cable? Can you make a picture of it.
RE: Ista D vs ISTA P - sollaris - 06-07-2016
(06-07-2016, 09:05 AM)snypertje Wrote: Wich K+Dcan you use and incl 20 pins cable? Can you make a picture of it.
Hello buddy.
Here is the picture.
The cable came with my INPA purchase.
![[Image: cAGhvfk.jpg]](http://i.imgur.com/cAGhvfk.jpg)
Thank you very much.
RE: Ista D vs ISTA P - Bimmer540 - 06-07-2016
Okay. K+DCAN can not read k-line so you need this cable:
Ista-d VCI config: ediabas
Setup com-port correctly.
right driver for interface installed? "from supplied CD?"
Ore you modified the cable.
RE: Ista D vs ISTA P - sollaris - 06-07-2016
(06-07-2016, 09:44 AM)snypertje Wrote: Okay. K+DCAN can not read k-line so you need this cable:
Ista-d VCI config: ediabas
Setup com-port correctly.
right driver for interface installed? "from supplied CD?"
Hello mate.
That cable i can not buy..because i have no slot inside my car for it.
I only got the 20 pins under the hood.
![[Image: bdJuqyc.jpg]](http://i.imgur.com/bdJuqyc.jpg)
I belive i have found 2 problems..Please corrrect me if i am wrong.
1.
I can not edit OBD.ini to set the COMP port to 9
Because i don't have a OBD.ini file
2.
In Ediabas.INI the TCP remote host is LMUC203404
Is that correct?
Here is my EDIABAS config file..after i edited it:
;#################
;# EDIABAS 7.3.0 #
;#################
;=============================================================================
[Configuration]
;=============================================================================
Interface = STD:OBD
Simulation = 0
EcuPath = C:\EDIABAS\ECU
SimulationPath = C:\EDIABAS\SIM
TracePath = C:\Windows\Temp
TraceSize = 1024
ApiTrace = 0
IfhTrace = 0
; IfhnTrace = 0
; SystemTraceSys = 0
; SystemTraceBip = 0
; SystemTraceIfh = 0
; SystemTraceNet = 0
; BipDebugLevel = 0
; BipErrorLevel = 0
UbattHandling = 0
IgnitionHandling = 0
ClampHandling = 0
RetryComm = 1
SystemResults = 1
TaskPriority = 0
; CodeMapping = C:\EDIABAS\BIN\ansi2oem.tab
; LoadWin32 = 0
NetworkProtocol = TCP
; --- neu ab EDIABAS 7.2.0 ---------------------------------------------------
ShowIcon = 0
LogLevel = 0
TraceBuffering = 0
TraceHistory = 999
TraceSync = 1
; TraceWriter = <FilePathName>
;=============================================================================
[TCP]
;=============================================================================
RemoteHost = LMUC203404
Port = 6801
TimeoutConnect = 2000
TimeoutReceive = 2000
TimeoutFunction = 10000
; TimeResponsePending = 5000
; DisconnectOnApiEnd = 1
; InitCmd0 = FE,04,00,03,01
; InitCmd1 = FD,05,00,03,01
;=============================================================================
[XEthernet]
;=============================================================================
RemoteHost = Autodetect
HeaderFormat = 0
TesterAddress = F4,F5
ControlPort = 6811
DiagnosticPort = 6801
TimeoutConnect = 20000
;=============================================================================
[IfhProxy]
;=============================================================================
Port = 6700
;=============================================================================
; End Of File EDIABAS.ini
;=============================================================================
Thank you very much.
RE: Ista D vs ISTA P - Bimmer540 - 06-07-2016
You must use that cable between 20 pin and K+DCan.
RE: Ista D vs ISTA P - beemered - 06-07-2016
You need the OBD.ini and you need to connect pin 7 + 8 in the K+DCAN