+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Mercedes Benz - Smart (https://cartechnology.co.uk/forumdisplay.php?fid=63)
+---- Thread: Xentry OpenShell PassThru 09-10-11.2016 (/showthread.php?tid=17898)
RE: Xentry OpenShell PassThru 09-10-11.2016 - Dee67 - 14-02-2018
Hi, All
Just installed this on Win7 Pro x32, install seemed to have gone fine. But when I start Xentry and select Diagnose it throws up an error 'Error on starting the process:: Xentry Diagnostics'
Thanks in advance
RE: Xentry OpenShell PassThru 09-10-11.2016 - MOMOSAM - 14-02-2018
Corrupt installation
Run The installation again se there might be some files haven't been copied
RE: Xentry OpenShell PassThru 09-10-11.2016 - Dee67 - 14-02-2018
Cheers MOMOSAM,
I shall do that, by the way anything that I should look out for?
Also, I did not install this in VMWare. Could this be the reason?
Thanks again
RE: Xentry OpenShell PassThru 09-10-11.2016 - MOMOSAM - 14-02-2018
(14-02-2018, 09:40 AM)Dee67 Wrote: Cheers MOMOSAM,
I shall do that, by the way anything that I should look out for?
Also, I did not install this in VMWare. Could this be the reason?
Thanks again
if you have tv I can inspect it for you
RE: Xentry OpenShell PassThru 09-10-11.2016 - Dee67 - 14-02-2018
Thank you, MOMOSAM
Would you like to inspect it in current state or would you like me to re-install?
If in current state, then please pm me so we can arrange the time.
Thanks again
RE: Xentry OpenShell PassThru 09-10-11.2016 - rs@chip - 27-02-2018
(15-12-2017, 10:46 AM)konstantin82 Wrote:(15-12-2017, 10:42 AM)HERVE06300 Wrote: Ok thanks a lot
I will try to find multiplexer
Name of that multiplexer is StarDiagnosis C3 or SdConnect C4 or new Mercedes Diagnostic VCI
Hi guys..I also try this on old w203 2004year and ecus are not detected..newer can-bus cars work perfect..may pinchanging on obd plug help with diagnose w203?
RE: Xentry OpenShell PassThru 09-10-11.2016 - damianrovira - 28-02-2018
Hello guys someone have this Xentry_Patcher_Free3.2.rar link ? the posted link is not working.
RE: Xentry OpenShell PassThru 09-10-11.2016 - tsimplas007 - 11-05-2018
Hi!
I'm thinking to buy a VAS 5054 to use it with XENTRY PassThru. I want to use XENTRY PassThru for online programming and SCN coding.
Does the quality of VAS 5054(bluetooth module AMB2300, fake OKI chip, upside down A5780A, 3,3V memory chips, etc) affect programming and coding functions?
Best Regards
RE: Xentry OpenShell PassThru 09-10-11.2016 - daro_mayday - 27-02-2019
hi.
i have question about connecting with sbc in w211.
it will be possible when I connect pin 7 with 9 or make switch between pins?
best regards
RE: Xentry OpenShell PassThru 09-10-11.2016 - Claytonscc - 03-03-2019
hi guys ,
i am trying to down load the open shell software and the torrent is really really slow between 10kb/s and 80kb/s it has at the moment frozen at 14% and 0kb/s just wondering if anyone had a link to mega or google drive at all
much appreciation to the cataha for the post it is very good