Xentry OpenShell PassThru 09-10-11.2016 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Mercedes Benz - Smart (https://cartechnology.co.uk/forumdisplay.php?fid=63) +---- Thread: Xentry OpenShell PassThru 09-10-11.2016 (/showthread.php?tid=17898) |
RE: Xentry OpenShell PassThru 09-10-11.2016 - konstantin82 - 15-12-2017 (15-12-2017, 10:42 AM)HERVE06300 Wrote: Ok thanks a lot Name of that multiplexer is StarDiagnosis C3 or SdConnect C4 or new Mercedes Diagnostic VCI RE: Xentry OpenShell PassThru 09-10-11.2016 - HERVE06300 - 16-12-2017 Yes I know I have a C3 with VMware but not work RE: Xentry OpenShell PassThru 09-10-11.2016 - konstantin82 - 16-12-2017 (16-12-2017, 11:40 AM)HERVE06300 Wrote: Yes I know I have a C3 with VMware but not work What say sdnet toolkit? RE: Xentry OpenShell PassThru 09-10-11.2016 - ecudiag - 17-01-2018 Hello. I have problem with VAS. If i try delate dtc das ask me pls ignition off, i dont try off. I have always on. any suggestion ? RE: Xentry OpenShell PassThru 09-10-11.2016 - sixcode - 18-01-2018 (17-01-2018, 16:53 PM)ecudiag Wrote: Hello. I have problem with VAS. If i try delate dtc das ask me pls ignition off, i dont try off. I have always on. here is a suggestion, google it, solution is easy RE: Xentry OpenShell PassThru 09-10-11.2016 - luisjmh27 - 28-01-2018 Hi Thanks for share program and video instructions. I've put it on a VirtualBox machine W7 X86 and works fine with Autel MaxiElite J2534. On vehicles that aren't on Euro 5 only can diagnostique ECU engine Regards Xentry OpenShell PassThru 09-10-11.2016 - jal1234 - 07-02-2018 Does the VAS5054A need a working Oki chip for pass thru to work on Mercedes? My clone is supposed to have an Oki chip, but it is fake (clipped lead). Sent from my Nexus 5 using Tapatalk RE: Xentry OpenShell PassThru 09-10-11.2016 - sixcode - 07-02-2018 (07-02-2018, 15:22 PM)jal1234 Wrote: Does the VAS5054A need a working Oki chip for pass thru to work on Mercedes? My clone is supposed to have an Oki chip, but it is fake (clipped lead). oki chip is old protocol so no in this case RE: Xentry OpenShell PassThru 09-10-11.2016 - jal1234 - 07-02-2018 Sixcode, Thanks for that. One more question. My unit has an upside down A5780A, which likely means it is also fake. Is that necessary for Mercedes passthru? RE: Xentry OpenShell PassThru 09-10-11.2016 - Enabled - 07-02-2018 A5780A is for J1850 VPW protocol, General Motors protocol. OKI is for J1850 PWM protocol, Ford Motors protocol. |