CarTechnoloGY
S1000RR E-Sys - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: S1000RR E-Sys (/showthread.php?tid=19880)



S1000RR E-Sys - autoraedarum - 28-11-2016

Is it possible to code a S1000RR (2012) with E-Sys ?

Which settings for ICOM clone must use in E-Sys

Which BRV needed in E-Sys

ICOM must relased or allocate

   
   


RE: S1000RR E-Sys - IZGOY - 28-11-2016

S1000RR (2012) with E-Sys ????or KFP???)))


RE: S1000RR E-Sys - kerekt - 28-11-2016

S1000RR diag ISTA+ , coding+programing ISTA-P or E-SYS.
work fine with DIY cable from old 6cylinder connector, 4 wires need: gnd,12v,canl,canh, tested myself

set ICOM-DCAN i have genuine head, probably work with clone too

(28-11-2016, 13:19 PM)autoraedarum Wrote:  Is it possible to code a S1000RR (2012) with E-Sys ?

Which settings for ICOM clone must use in E-Sys

Which BRV needed in E-Sys

ICOM must relased or allocate



RE: S1000RR E-Sys - autoraedarum - 28-11-2016

I have made this adapter a 6 cylinder ignition cabel

Must i use this ip (169.244.92.38) and which port or should it be 127.0.0.1, allocate or relase

K001 is the right one

Thanks


RE: S1000RR E-Sys - doktorabg - 28-11-2016

You need ICOM-D adapter for motorcycle.
K+DCAN or ICOM-A for diagnostic and programing/coding with Ista D/P
What coding you want to do?!?


RE: S1000RR E-Sys - autoraedarum - 29-11-2016

I can code my S1000RR with NCS-Expert, i will only try if it works with E-sys.

Does this ICAM-D adapter have any elektronic/logic insinde?

I can work with ISTA-P without ICOM-D adapter with my bike, i have flashed the newest soft


RE: S1000RR E-Sys - doktorabg - 01-12-2016

(29-11-2016, 09:11 AM)autoraedarum Wrote:  I can code my S1000RR with NCS-Expert, i will only try if it works with E-sys.

Does this ICAM-D adapter have any elektronic/logic insinde?

I can work with ISTA-P without ICOM-D adapter with my bike, i have flashed the newest soft

No,only adapter 16 to 10pin


RE: S1000RR E-Sys - autoraedarum - 02-12-2016

With NCS or E-Sys


RE: S1000RR E-Sys - isma123 - 03-01-2017

Depend on what year model , till 2014 ncs from 2014 e sys


RE: S1000RR E-Sys - sboshra2005 - 09-10-2018

hi
JA48zCGgTXpm86Uxb83YXQ==