NBT Evo is resetting while driving - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: NBT Evo is resetting while driving (/showthread.php?tid=19885) |
RE: NBT Evo is resetting while driving - ir0n87 - 30-11-2016 Made a lot and lot of tests... China or carsystems emulator got same behaviour... Randomly reboots. So it's not a emulator issue. My evo was flashed with 59.5 using tal calculation with G11. Now with psdzdata v60 and culculating tal with F20 (bootloader and swfl goes from v3 to v5) never get anny reboots from weeks! Bye RE: NBT Evo is resetting while driving - simonchs - 30-11-2016 (30-11-2016, 09:19 AM)ir0n87 Wrote: Made a lot and lot of tests... Flash with modify production date to 0716 or 1116? Or it’s doesn’t matter? RE: NBT Evo is resetting while driving - ir0n87 - 30-11-2016 I use 07/16 with V60 F20 psdzdata... U will see tal calculation will generate a v5 btld and v5 swfl. With v5 never get any reboots! Bye RE: NBT Evo is resetting while driving - chriscom - 30-11-2016 Where you get the Evo's with HW 2 upwards? RE: NBT Evo is resetting while driving - ir0n87 - 30-11-2016 (28-11-2016, 20:25 PM)krug Wrote: NBT evo F20 chines emulator same thing, NBT f13 carsystems emulator badly freeze controller and display until resetting kl15. Please cut pin14 from quadlock... NBT EVO make a short to GND in pin14 if connected to dimmer line! Bye! RE: NBT Evo is resetting while driving - ir0n87 - 05-12-2016 (30-11-2016, 07:48 AM)gt678 Wrote: Mine have 2.3, it was wrong what I wrote in my first post. Any news? What do u mean for "card zoom"? Bye RE: NBT Evo is resetting while driving - masa52 - 05-12-2016 Hi sorry could someone give me advice as I bought used CID for NBT EVO from F06 tried connect to my car which has factory fitted NBT but cid dont work error no signal and horizontal line displayed Is it normal need nbt evo unit or it should work on old nbt as well please let me know but if it should work I'll refund it thanks RE: NBT Evo is resetting while driving - 840i - 05-12-2016 (05-12-2016, 14:53 PM)masa52 Wrote: Hi Since you are using normal NBT and EVO screen, in order for the EVO screen to work, you need to flash your NBT with newer firmware and then it will work. I did pszdata 58 before and it worked just fine after that. RE: NBT Evo is resetting while driving - masa52 - 05-12-2016 Got latest software in NBT heard that in f10, f06 screen wont work very often even that latest software on it thanks RE: NBT Evo is resetting while driving - BaggieMatt - 05-12-2016 I would be seriously concerned about that vertical line. I would say that as it is not detecting a signal then that line is not being produced by the NBT and is therefore a failure of the screen. |