Change VIN in ECU with WinKFP possible? - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Change VIN in ECU with WinKFP possible? (/showthread.php?tid=20044) Pages:
1
2
|
RE: Change VIN in ECU with WinKFP possible? - Levanime - 30-01-2017 No changing vin will not cause any problems if you dont want to reflash module, u can change aif with tool32 (aif_schrieben) RE: Change VIN in ECU with WinKFP possible? - pdc - 18-04-2017 Easy way is to do full backup of your old dme and then copy it to the new one.Any good chip tuning tool can do it on the bench by BDM. RE: Change VIN in ECU with WinKFP possible? - ahmadarifai - 08-10-2017 Does the NEW DME needs to be the exact part number as old? or different will work after software flash. thank you all RE: Change VIN in ECU with WinKFP possible? - DNK76 - 08-10-2017 1) Replacing FA, NCS adding code W 205 AUTOMATIK AUTOM //AUTOMATIK-GETRIEBE or (depends on the automatic transmission) W 206 SEQ_GETRIEBE AUTOM //SEQUENZIELLES MANUELLES GETRIEBE entfallen nie Serie PA252/327 NCS coding for modular series with new FA 2)CAS and DME / DDE programming for automatic transmission You need to find the appropriate soft for these modules, as someone can do it ista_P will show what ZUSB numbers for WINKFPT programming 3)Enrolling the ISN code in the EGS driver (will change VIN too) Bmw explorer Autohex maybe the AK300?? , Abritus Commander |